miero

Regarding output signal purity, well designed class AB will always be better than any and best class D as known by now. This means...

Probably because it does not provide that premium distortion.

They could provide detailed spredsheet if they want. But it would reduce our screen time with SMSL logo visible.

@amirm Could you please check or record how much this DAC makes a pop sound when a sample rate or PCM/DSD format is changed? I wonder...

Replacement B100 came in, a brand new unit. Hooked it all up, everything sounds fine including the remaining amp on the other channel...

FiiO K19 has an impressive set of features. But with their performance target and current price around $1200 they could use dual...

Thanks to Amir for the review and measurements. I've read the comments from others who have commented on the "boring" nature of the...

Topping had a cheap 8-channel consumer DAC with the DM7, but has discontinued the device due to a lack of demand. However, there are now...

Or people who wants two USB inputs, or I2S input or AES/EBU input... I would appreciate if they created a "PRO" ES9039 based DAC with...

Measurement of load for MM (particularly) is needed. Ditto noise with an actual cartridge attached for reasons I posted about (and...

The linked post provides just a workaround that forces device driver to not close the audio device and keep streaming zero samples at...

Reminds the debut of the Okto DAC.

Isn't there a reason for so many models to fill as many positions as possible in the ASR top list? But the question is, does this DAC...

Nothing. It's there for mechanical support and heat transfer.

Is there something under the bottom "heatsink" that connects the PCB to the case, or it is there just for a complicated heat transfer...