Recent content by mateematy

Not mentioned but It was by mistake. I just unplugged them for some cleaning and the top was hot.

Yep, tomorrow I'll contact the shop I bought it from. It cooled down. We're good. Thanks for the support !

I unplugged the XLR cable and it's still hot.

Yes. I am not that familiar with the correct terms. Yes. I hope you understood from my drawing. No unfortunately.

Best I can do :)

I will try this and come back with feedback. What do you mean by electronics ? The dac or the speaker's electronics ?

My speakers are connected to a Scarlett 2i2 via balanced connection. To be more specific, if you look up pictures on the internet of the speakers, the three lines of the tweeter are the ones which are getting hot to the touch and the "cone" or "walls" of the tweeter are just warm.

Hello, I have a pair of Adam T5V and suddenly one tweeter started being hot while being plugged in. Should I be worried ?

I got the T5V’s and I had a really good first impression. As they are my first pair of speakers I really enjoy them, but I wouldn’t know how they compare to others. As for the sound, it is quite neutral, nothing really special other than an accurate representation of music imo. You have other...

Something like this ? https://www.sbooster.com/sbooster-tweaks/vbus2-isolator/ Or I can still return the DAC and get the Scarlett 2i2 and TRS to XLR. Still I quite like the ZEN.

No, headphones are absolutely fine, no problems. Its connected to my T5V through some RCA cables.

I plugged the Zen DAC into my computer and noise appeared and when I plugged it in my laptop it disappeared. Also when plugged into the laptop as soon as I plugged my HDMI cable it started to make noise again.

Hi I also have a ground loop issue, could you help me with an isolator ? Which one is better ? https://www.monacor.com/products/pa-technology/signal-processing/signal-optimisation/fga-40mf/ | https://www.monacor.com/products/pa-technology/signal-processing/signal-optimisation/fga-40/

That’s great to hear, as I was also thinking about the DT770 80Ohms. Also do you know how to solve ground loop problem ?Thank you !

I found out is a ground loop fault