Juhazi

Well, any pro would do this (and anything else required to polish) in the DAW once the the recording is done. But guess what, you can...

The RIAA equalization and preamp is a marginal use case for this converter. And if you were as serious as you demand from the vendor to...

Would it sell better? What would be the point? Few hz lower wouldn't make any real world difference. Likely 2x15" with ~150 litre net...

Typical prose, having to choose some special "audiophile music" so such horribly wide dip which sucks the energy out of "real music"...

No, they didn't -...

Highpass filter for phono cartridges are around 20Hz, to suppress cartridge/arm resonance whis is typically around 10Hz. Without...

Does it have a rumble filter?

Fosi X5 natually, this thread is about it. I could even pay 5€ extra for it, no switch needed! I do have a low budget preamp with...

When can I get a unit with built-in rumble filter (highpass)?

Looked in on this thread. I can certainly agree with the article comment on the "wastebasket" of timbre. I have never ever seen it...

Thanks for that heads up. I've now realised why this thread is pissing me off. For those of you who want to use "Timbre" for...

So, all your measurements are at 250cm in-room? Looks like impulse right window gating was 300-500ms. Measurements include many room...

Ah, now this is a completely different direction from your first question (which I answered in post #6). As I stated, 1st there's...

I thought I'd share some input here guys as I've recently upgraded my equipment: Audio streamer: from Yamaha WXC-50 to WiiM Pro Plus...

"Nelson has never made any contribution to the LX521 implementation....active OR passive" Right, sorry, he did LXmini ASP. It is a long...