John_Siau

0 Hz is wind if there is a DC offset.

In my opinion, the power amplifier should not produce noise or distortion exceeding 0 dB SPL at the listening position at any available...

Thank you for your comments. I wasn't implying that anything is wrong with the frequency response of the MR10, just that external...

In stereo mode, at full output voltage (28.28 Vrms), the AHB2 is designed to enter protection if the loads are lower than an EPDR of 1.1...

Here at Benchmark, I had the opportunity to test the Alcons MR10 in one of our listening rooms. This room is equipped with a pair of PMC...