DanTheMan

Been a long time since we've had a subwoofer review from Amir even if its from car audio :D. It is really hard to get these thin subs to...

I don't know, in my experience this is rarely used in the back of any car. Almost any dealer/vendor/friend/anyone will an opinion asked...

Context is key. This compact subwoofer is specifically designed to enhance bass in a small car cabin -and that’s its entire purpose. It...

Spec's; ... rather ambitious there on "max power". :D Cheers for the testing on this @amirm. JSmith

Thanks. The Helix stuff is highly recommended but is expensive. The unit in the pdf costs $2,000. We only use the van during summer...

This is a review and detailed measurements of the JBL DS4086 8-channel car audio amplifier with same number of DSP channels. I bought it...

When a speakers measures well anechoic-ally or in this case on the NFS that always translates into a more transparent sound in room...

We had the LS1s from the beginning ( they were like everything ) much cheaper back then, Bruno Putzeys first speaker design, I have...

Applause to Grimm Audio for taking the trouble to send a speaker to Amir for testing. I have heard this speaker several times and also...

Goosebumps! Many many thanks to Amir for this fantastic review. This is exactly what we've all been waiting for. Finally, an analysis of...

True, and part of the reason I said "typical standmount speaker". It is also quite common for large floorstanders to be designed with a...

It is 6 inches above the floor. A number of floor standing speakers have port down low there, maybe even lower.

We are very consistent as I test every speaker the same way. If a speaker is in-wall, sure, I measure it as infinite baffle. If it is...

I hear you but the same applies to any other speaker in bass frequencies. Ultimately we want to measure fully anechoically to see the...

BTW, compare my measurements to that of stereophile: They really need to correct for their near-field response error (the bump). It...