Recent content by chekhonte

I did the boiling water suggestion and soaked it for about 30 minutes. Most of the ripple was gone. I reattached it to the turntable and I could still feel a little bump and gently took some 300 sandpaper to the rubber edge while it was spinning and now there is no more bump. I’m considering it...

Thanks for the suggestions. I found a pro ject debut carbon on Facebook for 150 last night and got it. I’m going to try my hardest to fix this one and give it to a friend. I’m going to try boiled water if that forest work I’ll try using a hole drill and make a clamp out of plywood and hit it...

I found a z2000b at a garage sale and picked it up. It’s in remarkable good condition and only needed some routine liberating. It does have one problem I’m not sure how to fix: The pulley is driven by a rubber idler similar to the one pictured. It’s slightly warped on a small section of the...

They were made by wedgwood to celebrate his presidential victory. You can find one on ebay for around 75 bucks. Search for a combinations of wedgwood jasperware basalt Roosevelt. When I discovered them, I had to buy 2.

Not a problem. He got back to me and we're going to try and meet up.

Thanks!

I switched to projection when I bought my first house 7 years ago and I'll never go back to panel tvs.

I live in Shoreline, not far from amirm and have a pair of sendyaudio avia. These headphones haven't had proper testing by anyone. There's one guy on headfi who measured them but advised that something was wrong with his kit at the time of testing. I'm genuinely curious to see how these things...

It's why the pros plate with nickel. It resists wear way better than gold and once you have bare undermetal showing, let the oxidation begin.

That room filling sound Is what I miss about my old pair. I concur that it's reflected sound that makes them sound so big even with out much bass impact. My brother and I built these plywood wedges that we placed behind the speaker to project the sound up to reflect off the ceiling but the room...

The Perseverance will is equipped with two microphones and will be recording and sharing the sounds on mars. https://www.space.com/mars-2020-perseverance-rover-microphones.html Mars has an exceptionally thin atmosphere. I assumed this would mean that the sounds would be high pitched but so far...

HD800's are a pair I have to try some time when headphone clubs start up again. I moved to seattle 6 years ago but haven't gone to a meet up yet. I had a pair of Hifiman he560's and that for a time was the end of the road for me and I've missed out on a bunch of cans.

I definitely want to get a pair of sundara or ananda. I have not heard any of the lower ohm hifiman headphones. I might even go up to the arya if I find a used pair at the right price.

Thank you. I am going to try that.

I admittedly have not eqed them. They are from the original run when the k702 first was released. I was still using an oppo CD player to listen and mo3 was considered passé. I gave them to my wife for when we mix her music because I do love their midrange and soundstage which to me makes soft...