AudioScience Enthusiast's latest activity
-
AAudioScience Enthusiast reacted to Ellebob's post in the thread KEF R6 meta Measurements and Review with
Like.
The best location for bass is not the best location for mids and highs. Having the subwoofer separate allows you to achieve better bass... -
AAudioScience Enthusiast reacted to HarmonicTHD's post in the thread KEF R6 meta Measurements and Review with Like.
There is no generic answer. As posted above, ideally you run REW measurements to decide. The capability is secondary in that decision.
-
AAudioScience Enthusiast replied to the thread KEF R6 meta Measurements and Review.R6 Meta with room gain and EQ is more than capable of going below 80Hz, so why not set XO lower than 80Hz whenever possible? I find the...
-
AAudioScience Enthusiast reacted to Ellebob's post in the thread KEF R6 meta Measurements and Review with Like.
Crossover should be set by room acoustics and help solve acoustic problems. It shou be set by speaker capability unless the speaker is...
-
AAudioScience Enthusiast reacted to Gorth33's post in the thread KEF R6 meta Measurements and Review with Like.
Room gain makes crossover à bit lower than the speaker can do. My fronts crossover is detected at 40hz.I have set it to 60hz. For now I...
-
AAudioScience Enthusiast replied to the thread KEF R6 meta Measurements and Review.If Audyssey detects the native crossover should be 60Hz, then I don’t think my Dirac Live 50Hz XO after a bit of Low Sheld EQ is...
-
AAudioScience Enthusiast reacted to Gorth33's post in the thread KEF R6 meta Measurements and Review with Like.
I just received my R6 Meta yesterday. Simple EQ with Audyssey XT32.Detected crossover at 60Hz. First listenings are really convincing...
-
AAudioScience Enthusiast replied to the thread KEF R6 meta Measurements and Review.No, I didn't bother because I don't play at reference volumes. Even when watching a couple of explosive Christopher Nolan movies, I...
-
AAudioScience Enthusiast replied to the thread KEF R6 meta Measurements and Review.Since I used Dirac Live Bass Control, even when setting it to 50Hz XO for Center channel it really has a roll off stating at 70-80Hz, so...
-
AAudioScience Enthusiast replied to the thread KEF R6 meta Measurements and Review.Good question. I did try 100Hz XO, but somehow the low frequencies for human voice coming out of the subs are not as natural as the lows...
-
AAudioScience Enthusiast replied to the thread KEF R6 meta Measurements and Review.After struggling with R6 Meta for a bit, as suggested by some forum members, I added a Low Shelf and found the ideal XO of 50Hz using...
-
AAudioScience Enthusiast reacted to Chromatischism's post in the thread Kef R6 meta initial impression with Like.
That will sound so much better having speakers that can blend with the subs below 80. I think this fact is underappreciated on this forum.
-
AAudioScience Enthusiast reacted to pjn's post in the thread Kef R6 meta initial impression with Like.
You probably can, but the R7 are exactly the same drivers as the R6 and was my solution at a similar listening distance - very pleased...
-
AAudioScience Enthusiast replied to the thread Kef R6 meta initial impression.My listening position is 10-12 ft away so unfortunately the LS50 "low cost" solution won't work well then. It's probably a better to...
-
AAudioScience Enthusiast reacted to Descartes's post in the thread Kef R6 meta initial impression with Like.
The LS50 are great if you sit close to them less than six feet I would say!