Anyone make a less than $300 class D with the following capabilities?

[CPTX]

High pass filter for satellite speakers
Separate low pass sub woofer out
Blue tooth
Headphone out

 

[CPTX]

Yes, I am flexible on the price….up to $500

This one is close, but no separate sub low pass and no headphone out (suppose you could use the RCA pre out with RCA/headphone adapter)

 

[DVDdoug]

You might have to go a little over $300 but you get the most features for your dollar with an AVR. I assume they are all class-D because that's the most practical and economical way to get a few hundred watts.

The standard is a line-level subwoofer out for an active subwoofer with no power amplifier for the sub (which is what I think you are asking for.)

 

[CPTX]

I have a passive sub…so basically what I have Dayton Audio DTA2.1BT2 plus high pass filter for the satellite speakers would be ideal….yes I have some inline high pass filters…but, I desire the ability to fine tune/modulate.

 

[CPTX]

^^^Great suggestion…..was trying to accomplish a solution with one purchase…..but I do like the two purchase solution a lot.

Yes, so the DTA-100ST RCA out to something like this:

 

[CPTX]

I do have a powered subwoofer or two upstairs…I just really like the passive one I already have downstairs for this application…..small…low profile

 

[CPTX]

An alternative to the DTA-100ST is the $110 RSL 1A255.1. But, the high pass filter is un adjustably set at 90Hz for the RSL and the sub pre out is a plug jack instead of speaker wire binding posts.

 

[CPTX]

Looks like this solution should work as others have already performed this procedure.

 

[CPTX]

Of course, nine hours after getting the credit card out; I thought of a single product solution after a night’s rest.

I could have purchased a $165 DSP and DSPd everything so as not to worry about analog filters/crossovers/pass throughs/EQ.