Dear All
I have an email, this morning so I replied.
I did not know it was automatic mail for someone replied my post
Here is what I replied to Amirm
Dear Amirm
Thank you for replying me and the attempt to give explanation. I presume that I understand your theory. However, what you have measure which if it is correct as it is that Entreq add noise to your measuring device. Then that noise floor should be audible what so ever in your Hi-fi system. Unless You never try on your Hi-fi system but only testing the box with device. Because, if Entreq doesn't ground and only are some wiring cable and box that connect to your hi-fi system, then it should at least audible either beneficial to your listening or not. This obviously contradicting within your own content. Unless what you are measuring outcome to be indifferent either hooking Entreq box or not result are the same(nothing happen). Only this way your content would not be contradicting within itself.
But please don't get me wrong I just pointing out thing that doesn't seem right. Also theory is just theory.
The result point out that there is something changed (adding some kind of noise) However, when connect to an audio system there is no different. Well I think you should at least point out that you can audit some level increase of noise floor as the same as you measured device tells you. Otherwise, it is pretty much contradicting.
Thank You
SN
And I never find any car audio any fidelity.
Dear BE718
As I have mentioned before that the previous post was only one of many things I can share about grounding objects. The point is I understand how it works not in term of magic.(About "magic" non of us mentioning it, Only you who have mentioned and I would be appreciated if you can define the word "magic" for this particular forum or at least in general or how you intend to use it)
It might not be "magic" word of yours. I see it in term of Energy flowing within our Universe.
How this Entreq Box work?, I only can presume from my knowledge because I am sure there are more secret into this Entreq Ground Box.
1st Stage) Electric Energy (Stray Current or Switching Current within your audio components), Going through the Entreq grounding cable, then as they hit the Box, the Electric energy start to run around within the Box, this stage the Electric energy changing into Kinetic Energy (Moving Energy),
2nd Stage) Once the Kinetic Energy keep moving faster and faster within the Box, the Kinetic Energy will transform into Thermo Energy (little heat) and finally the excessive energy are used up.
That is how "Entreq - Energy Transforming Equipment" does thing as it said right in the front of itself.
(And this short grounding path is draining away stray currents much faster than regular standard home grounding, it is fast enough to drain away all stray current before it effect the performance of your audio equipments.)
By Draining out stray current within your audio components, which attract all kind of EMI and RFI into itself (the stray current is the home of these noise) once this happen the EMI and RFI will cover the clear flowing of all signal path within your audio component. Therefore, if you hooking up an Entreq ground box as it's instruction correctly, You might hear some amazing sonic performance from you HiFi system.
Frankly, I am not a man at material level, but at Energy Perspective Level.
Have you ever considered Why a Pre-Amp + Power Amp?? Why people in the old time design this sort of things?
It is because Power Amplifier is only to amplifying the signal. The correct designed Power Amplifier must only have one switch. Which is ON/OFF switch. For the input selector must not be relay and must be manual. Otherwise, this will trigger the switching current within your audio component. Your audio circuit board will pretty soon be full of stray current which draw unwanted signal/Noise from around the area.
So, Grounding your audio components should be a good idea. And yes I agree with Amirm the shorter the ground cable (path) is the lower the noise floor. As mention before, the clean current of both inflow/outflow directly effect the outcome of sonic performance of your Hi-Fi system.
A lot of people are being fascinated by HiFi system because, whatever change you make to it, the sound will alter, having wood as an audio board, or pure quartz will give so much different in sonic outcome.(I believe, somehow it might be similar to a theory "Strings Theory" where everything in this Universe is vibration).
I think a Hi-Fi system simply is a system that transform electric energy into sonic energy, isn't it? (If you are looking at a bigger picture)
The best a Hi-Fi system at any given price level can do is to carry the source's signal and delivering them as it is (as losing it as few as possible).
Best of all, trying things for yourself and you will see.
I want to share something I think more or less beneficial to anyone, and also I want to learn things from any one as well.
Thank You everyone who replied
Great Health, Great Wealth to We all!!
SN
With the greatest of respect your explanations above are not consistent with known and proven electrical theory. I have spent decades working in instrumentation and measurement acquiring and analysing signals that are, in no relevant way, different to audio. Having to ensure those signal measurements are accurate and free from noise and spurious signals. It really doesn't work the way you imagine. Imagination is all you have there.
Sorry.