rca to xlr

Happy new year all! Go easy on an absolute rookie here thank you. I currently have a 7.2.4 home theatre audio setup with a Denon AVR-X6700H receiver. My goal is to use all available channels which requires amplification of the two remaining channels to create a 7.2.6 setup. Little did I know...

Hi everybody! I need a good (in the sense of 2 wires inside and shielding apart) cable to feed a Genelec active monitor (XLR input) from WiiM Ultra RCA. I was told by other member that many cables on the market are improperly connected and don’t benefit from the 30 dB protection against...

Hello! When pushed all the way up in the preamp gain I am getting 14dB of noise from one of my sources, all others make nothing, zero, nada, of noise at that highest gain of the preamp. The source that has noise is connected this way: -Cartridge - Ortofon Quintet Black S (MC low output) -Tonearm...

Hello, this is my very first post here; what I like of this site is that pretty much of it is based on facts; of course opinions are valuable as long as their are reasonably backed by measures. I have a simple question and I thank any comment in advance: My audio chain runs single ended in...

As measured by WolfX here: https://www.audiosciencereview.com/forum/index.php?threads/measurements-of-transaudio%EF%BC%88china%EF%BC%89drv134-rca-to-xlr-adaptor-converter.9948/ This converter takes RCA input and outputs a proper balanced XLR output. For example 2Vrms RCA in, 4Vrms XLR out with...