Search results

I haven't owned the R Meta, but I have owned the the r3s, the Ref 201 and listened to the previous Ref 1s. The Seas is right up there with them.

I'm astonished people think this speaker is worth a 53 page thread, especially given the source. Like yourself I have vivid memories of Mr Ritchie's theories through various DIY forums over the years, as well as a few direct interactions with him when this coincided with my interests (mostly...

I doubt the expense of 9 KEF coaxes would be rewarded. Given the USP of the 901s was front back radiation, I suspect a good open baffle dipole would be the modern equivalent

MiniDSP products tend to have a longish product cycle unless something new and shiny comes along. In which case they release it first as a processor. Nothing new and shiny is on the site apart from different input and output options so I suspect no new SHD amps for a while. Given the...

Well, that's the SINAD problem isn't it. Given that the noise level of a room is vastly worse than the SINAD of even the worst electronics, does it matter?

I've been using Digital EQ for many years, starting the now venerable Behringer DCX2496, moving on to better pro units such as dbx driveracks, then various MiniDSP units and auto EQ systems. Measurements clearly showed the early units added noise, and in the case of those with analog inputs so...

Good decision. I’m unable to tell an iota of difference in any amp measuring above indecent. But room EQ makes an obvious audible (and measurable) difference. I’ve been using Minidsp products since they first came out, and still use one of their DSP amps. If you are prepared to do a bit of...

The Neo is very good, but it isn't an AMT. It is a planar magnetic. I've had both the Neo and now an AMT (AST2560, same as the Bordeaux) in my DIY speakers and slightly prefer the AMT both objectively and subjectively. Not sure if they are better than regular tweeter, but I run them dipole.

When Rooning, I use Sonos over Airplay. Sonos streaming adds a buffer to avoid dropouts and glitches. Despite having very good wifi coverage, I still get occasional dropouts using Airplay via Roon (although not Airplay via Apple Music). With Sonos these glitches are considerably less.

If you can measure properly, you could do room EQ below 200Hz or so, but if you can't I also wouldn't do anything other than maybe experiment with a shallow high shelf filter (5-7000k, -3dbish, .5Q). Plus they need subs below 100Hz. It's interesting that the CDM1s from 1998 measure vastly...

It doesn’t seem to in my case. I had no issues when I was using the optical out of my Wiim to my DAC via Roon. But I’m now using the aux output directly into active speakers and getting an audible (albeit low level) glitch after every track. It doesn’t drive me crazy, but it does bug me...

You are in the value sweet spot. There are a bunch of extraordinarily good value speakers around at the moment, most of which have been mentioned above. T5V, 305P, KRK G4, Kali LP6, Vanatoo. You might be able to get the bigger bassier versions for your budget. Although I don’t think you...

Does Gapless work through the aux output, or only the Toslink?

https://wiimhome.com/Technology Scroll down to the Adaptive EQ section.

The Wiim Site mentions enabling Adaptive EQ. How does one actually do this? Is it a digital out only thing?

Reference series date like any other speaker. A while back the R3 were my main speakers. I'd always wanted a set of 201/2 Reference (fabulous measurements in Stereophile) and when a cheapish pair came up I grabbed them and compared both side by side. Subjectively and objectively. I can't find...

As previous owner and fan of KEF coaxes (LS50, R3, Reference) I've been eying the LSX to replace the Sonos One's in my bedroom system. But have been put off by the dismal reviews of the software and reliability. I'm not planning on using the KEF streaming apps, but if you search for 'Roon has...

Sorry to bring this thread back from the dead. But due to aesthetic considerations (AKA WAF) I am looking for a single box active speaker I can use for stereo rear surround. As such, it would need independent L & R channels and control of them via my prepro. The Sonos 5 accepts a stereo line...

I have three way floor standers that are basically prettier versions of the Revel F208s so beloved here and elsewhere. Plus subs. So four way. :)

I remember when SVS were founded. With the original tube subs. At the time most subs were badly designed unless you spent the really big bucks on something like a top of the range Velodyne. DIY sub builder were seen as underground weirdos. SVS were pretty much the first DIY based outfit to go...