Search results

Maybe you are right :) I'm not sure if we can still call it "open source streamer" if the player is RoonBridge

The title should be "ASR Open Source Streamer Project"

Roon is not open source.

https://github.com/bz31/Buildroot/commit/5594d56dbad6c388c74b8b344f3260ac3e79464b In buildroot "make menuconfig", Filesystem images, initial RAM filesystem linked into linux kernel

LMS (Logitech-Media-Server) was my first audio server before switching to UPnP. I'm switching back to LMS after trying the web UI "Material skin plugin". LMS: https://forums.slimdevices.com/showthread.php?113511-Logitech-Media-Server-8-1-0-released! Material skin plugin...

Thank you for your feedback. Not using RoonBridge, I wasn't sure if it worked.

You can add some more swap root@nanopineo2:~# dd if=/dev/zero of=/swapfile.img bs=1M count=512 root@nanopineo2:~# mkswap /swapfile.img root@nanopineo2:~# chmod 0600 /swapfile.img root@nanopineo2:~# swapon /swapfile.img

My old OS images may have a problem connecting to the router via dhcp. :) To fix it, try to add an option udhcpc_opts -t 5 in /etc/network/interfaces https://github.com/bz31/Buildroot/blob/master/board/nanopi-neo2/interfaces

I can try to recompile another one if the current OS image (the one for roonbridge?) works already for you. Could you please test it ? It seems that this image may not work depending on network configuration (dhcp problem).

You are right. Indeed I have compiled a minimal OS image.

I don't have the OLED module to test. The startup scripts are all in /etc/init.d/. If the image works for you, you can try to add your script (and driver).

I don't use Roon, but I tested it. It worked. Here are my OS images https://github.com/bz31/Buildroot/wiki

A new similar SBC ZeroPi is out. :) https://www.friendlyarm.com/index.php?route=product/product&product_id=266 Here is a presentation showing the differences against NanoPi NEO https://www.cnx-software.com/2019/09/05/zeropi-allwinner-h3-sbc-gigabit-ethernet-spi-flash ZeroPi seems to me to be a...

It is not difficult to install RoonBridge on any Linux distribution on a SBC if you know how to use ssh. (See http://kb.roonlabs.com/LinuxInstall ) Manual Installation example (If wget and tar are installed) (run commands as root): mkdir /opt (create a directory if it doesn't exist) cd /opt...

Instead of setting a single output audio format, we could try to let alsa adapt it automatically with plughw. Here is the shairport-sync.conf I use sessioncontrol = { allow_session_interruption = "yes"; }; alsa = { output_device = "plughw:0,0"; };

Sorry it didn't work for you. The images have only been tested on my system. Maybe it lacks support for your hardware. I use USB interfaces with XMOS chip (USB Audio Class 2.0), and only audio files formats mp3, flac and wav.

Yes. It should work. But only tested at home. (unzip the file after download) If you take the first image, you have by default UPnP/OpenHome renderer (upmpdcli with mpd) and Apple AirPlay (shairport-sync), which work after boot. Streaming services need to edit a file via ssh to configure your...

You could first try one of my OS images ( my previous post ), it is plug and play, maybe it will work :)

Thanks Amir. Buildroot is a very good choice (instead of piCore) if you want a minimalist Linux just for audio. I use it on NanoPi NEO and NEO2. Here are my config files for building system images: https://github.com/bz31/NanoPi_NEO-NEO2_Buildroot And the zipped OS images to download...