Search results

Here are mine: https://www.audiosciencereview.com/forum/index.php?threads/neumann-kh-80-dsp-room-measurements.53982/

Don't forget to compare on Spinorama.org. 705P x KH 150 below. https://www.spinorama.org/compare.html?speaker0=JBL+705P&origin0=ASR&version0=asr&measurement=Estimated+In-Room+Response&speaker1=Neumann+KH+150&origin1=ASR&version1=asr

"The Moondrop MIAD 01 is priced at 2499 RMB, which is about $345. That's a lot less than expected and, comically, cheaper than the company's mechanical keyboard." Wow, the last part is crazy lol.

Try the Zero 2 and you should like it a lot. 25 USD, not much, worth a shot.

Yes, it was set to EXCL on input. I edit the post before to change the EQ to 5 bands. Now I stored the EQ and remeasured 90° MMM same as before. Looks nicer. Red: single sweep. Yellow: 90° MMM. Green: 90° MMM real measure with EQ applied.

Updated to latest REW version 5.40 beta 27, did another 90° MMM, set the RTA - Appearance option "Adjust RTA levels" to align with the single sweep. Another tentative EQ now using 5 bands (ADI-2 limit).

Pink noise now with high pass 40 Hz, 90° calibration file, UMIK-1 pointing at the ceiling, moving around my head position. Removed the first 2 MMMs as they were garbage anyway. The new 90° MMM changed mostly the highs a little. Its trend is closer to the top single sweep, with less wobbling...

Changed to RTA 1/48 octave now, you are right, much better. Any other tips for measuring?

I am using REW + UMIK-1 for room EQ of my office setup, which is based on RME ADI-2 DAC fs + Neumann KH 80 DSP. The 1st 2 bottom lines were done using MMM: pink noise on generator, RTA with 32 samples. The 3rd and higher line is a single measurement holding the mic roughly where my head...

Neumann KH 150 and stretch the budget if necessary. Room EQ for modes and you should be fine.

https://www.audiosciencereview.com/forum/index.php?threads/rme-dps-2-linear-power-supply.53978/

To be honest I expected the manual to show differences in measured performance in XLR/RCA/HP out and ADC in. If there are improvements, it would be a selling point, and let the owner choose between price x marginal performance improvement.

This would be a total "shut up and take my money" product from RME. @MC_RME

From their Facebook below. Link for the manual with measurements here: https://www.rme-audio.de/downloads/dps2_e.pdf #RMEAudio launches DPS-2: Super Low Noise Linear Audio Power Supply with Unique µFilter and Sensor Technology: https://rme-audio.de/de_dps-2.html The new DPS-2 is an...

This would be a tiny incremental upgrade, not sure if it's worth it.

The IsoAcoustics Iso-Puck Mini is ideal as it is rated 2.75 kg each x 4 = 11 kg per speaker. They cost 95 USD for the 8 pack. https://isoacoustics.com/pro-audio-isolation-products/iso-puck-series/

Agreed, would make more sense a stack of subs in a mid range series.

Welcome to ASR. More here. https://www.audiosciencereview.com/forum/index.php?threads/deciding-between-ncx500-purifi-eigentakt-and-nilai.45744/

Good idea. I just tried 10.6kg of gym weight, myself, and me+weight, and it matched to the decimal. So it is accurate on the 10-11kg range. Thanks for the tip.

I just measured mine using a bathroom scale: 11.0 kg (24.25 lbs) each speaker by itself. How precise it is, your guess is as good as mine. I don't know where @pierre got his number for Spinorama.org though...