Search results

Channel mapping is performed by your choice of software.

I run FIR crossover's is there any advantage running beta v2.

Just confirming for others that might be considering running Ubuntu 23.04 server. (GNU/Linux 6.2.0-1007-raspi aarch64) The tutorial works perfectly. In my case, just seeing if the latest 6.2.0 kernel helps support the motu better in my setup. Seems like things are stable now...

A saved SSD image would certainly make this ALOT faster and easier.

I have been hearing some intermittent discrete 'beeps' and small glitches during playback, which the Roon convolver doesn't do... Trying to diagnose atm. I wasn't experiencing this with LMS/CamillaDSP. I have so far I have updated all packages, rebooted the pi4, Re-enabled resampling check box...

@mdsimon2, thanks for your guide, and motu configuration files. Without these, I would have absolutely struggled. Can I ask, do you know the input numbers for spdif on the Motu mk5 UL? I wanted to create a config file from the toslink version I created. I don't currently have a Spdif source...

Although obvious, I just wanted to chime in and confirm the tutorial provides a working solution using Roon bridge (running on RPi4) also. This is helpful if you don't want Roon hosting EQ/filters. ATM, I have CamillaDSP capturing @ 96khz and outputting at 96khz. Roon, automatically noted the...

Thanks Michael, I don't use CamillaDSP volume, so this doesn't present an issue for me, I set CamillaDSP volume to 0db when using LMS anyway. I control volume in my software player, or via DAC.

Read the speaker review. All is answered.

Are you referring to the measured OEM JBL response curve? By Erin above and here…. https://www.audiosciencereview.com/forum/index.php?threads/jbl-m2-reference-master-monitor-review.26051/

I'm curious, how can this be the case, we can see below from a previous post that @pos settings measure the same as the OEM filters? and match the BSS settings? +8db, provides a very different response in rephase.... and one which doesn't allow for flat correction to 30hz? I have personally...

Thanks very much for the overview. Yes, the Motu MK5 UL takes about 3-4 seconds to switch sampling rates. In Roon I use a sample rate change delay to compensate. Need to explore a solution for LMS.

I was hoping CamillaDSP could automatically accept the native sample rate of the content, rather than need to resample all content @ 44.1khz. Roon as an example will playback native content sample rates I.e. 44.1, 48, 88, 96, 192, etc and select the matching sample rate for convolution filter...

Michael do you think you might provide a how to guide for enabling scribble and resampling? Would be very appreciated. Auto sample rate change on input, with output reflecting that change would be amazing.

Thanks for your help Michael, I think I'm all good now. Just need to remove the volume attenuation on restart.

Just a word of caution to others, Make sure your output convolution filters are created in the same sampling rate as set in CamillaDSP. I upload 44.1, instead of 96khz. By mis-matching the convolution filter sampling rate, I observed significant level differences between Roon and CamillaDSP...

Is there any reason why mid song CamillaDSP would reset volume to -40db without intervention? I had it playing at -2db, using a different .yml and did not touch the software. Looks like the config switched? to new config from the base config???

Ok, after checking again, and rebooting, it seems to be active. I noticed if I change the mixer size, and align the pipeline the service goes offline. I just muted on the mixer instead. Thanks

I used this command: sudo systemctl enable camilladsp

Coincidentally I'm getting the following error, if I start camillaDSP manually in terminal... 2022-12-06 15:00:13.230941 ERROR [src/bin.rs:344] Playback error: ALSA function 'snd_pcm_hw_params_set_channels' failed with error 'EINVAL: Invalid argument'