Recent content by will.b

Have a look here for device spec details: https://www.minidsp.com/products/minidsp-in-a-box/flex (specifications tab) Amirm has measurements for analog in and out on page 1. I wouldn't expect the unbalanced version to be significantly different.

@Harris48 This video may be of use to you as well:

Thanks. From reading that, both orientations are valid for stereo use with respective calibration file, but the vertical orientation should always be used for multichannel/surround setups.

This is a bit strange. I use the UMIK1 myself and from a miniDSP support page it says otherwise: https://support.minidsp.com/support/solutions/articles/47000681633-which-direction-should-i-point-the-umik-1-

I'm not an expert but isn't the UMIK-2 an omnidirectional mic, so designed to capture sound equally from all directions?

That's odd, on the product page it says otherwise: Which calibration file should I use and where to point the UMIK-2? We provide two calibration files to be used depending on your application. - For stereo system (e.g. 2ch dirac live, single speaker measurement), use the 0deg file and point...

@syn08 Assuming you have a stereo setup, aren't you meant to use the mic horizontaly and so use the 0deg calibration file? Have a read through this thread: https://www.audiosciencereview.com/forum/index.php?threads/rew-moving-microphone-method-help.12641/ you might get some usefull tips.

Not used it but there is "Dolby Access": https://www.dolby.com/Gaming/ Available for Windows PCs: https://apps.microsoft.com/store/detail/dolby-access/9N0866FS04W8?hl=en-us&gl=us

Nice option on there now to "CUSTOMIZE SELECTION" where you can just select the inputs you use. For me it's just USB for the PC and TOSLINK for the TV, so now when I use the remote to switch input, it only has the two choices to alternate.

It's working fine for me. I just followed the instuction notes. Had a few reboots and resync from what I remember. Maybe try to completly remove the drivers/software and start again with just the new version.

What about just using the Flex Eight? https://www.minidsp.com/products/minidsp-in-a-box/minidsp-flex-eight

Similary for me too, the balanced connections was probably the main reason for my upgrade from the DDRC-24. All my other equipment have balanced connections. You probably won't notice in your setup but for me the complete lack of hiss from the mains due to the Flex is much appreciated in my...

@prerich What was the advantage for you in the Flex against the 2x4? Seems like they would do the same job from what you have described.

I've experienced the same when the audio output is set to Wasapi(Exclusive Mode) in Qobuz. Change it to normal Wasapi and it's fine. Works fine with either mode via Roon.

Nice subs but it might be worth considering the Monolith THX subs as they have XLR inputs. The added EQ on the SVS subs is available on the Flex.