WhiteBear
Member 41
- Joined
- Messages
- 17
- Likes
- 9
Latest activity Postings About
-
-
WhiteBear replied to the thread Visible gap between the coaxial assembly and enclosure on my Genelec 8351B — does this look normal?.Thank you. I understand your point, and I agree that manufacturing tolerances must exist. However, I think there is an important... -
WhiteBear reacted to Andreas007's post in the thread Visible gap between the coaxial assembly and enclosure on my Genelec 8351B — does this look normal? with
Like.
Once your mind has fixated on a small detail and you keep thinking about it, it becomes difficult to let it go again. I guess the only... -
WhiteBear replied to the thread Visible gap between the coaxial assembly and enclosure on my Genelec 8351B — does this look normal?.I agree with your last point. I think most people who buy Genelec monitors are hoping to get the best possible performance and...
-
WhiteBear reacted to illusonic's post in the thread Visible gap between the coaxial assembly and enclosure on my Genelec 8351B — does this look normal? with Like.
I'm sure many people would take that opportunity and buy them at lower cost as long as acoustics are not affected. Genelecs are not...
-
WhiteBear replied to the thread Visible gap between the coaxial assembly and enclosure on my Genelec 8351B — does this look normal?.Even after comparing dozens of images I have collected, I still do not see a gap like mine. The examples shared by members here also do...
-
WhiteBear reacted to tmtomh's post in the thread Visible gap between the coaxial assembly and enclosure on my Genelec 8351B — does this look normal? with Like.
I have a pair of 8351s as my main stereo listening speakers (and am quite happy with them). I just took a piece of 110lb card stock...
-
WhiteBear reacted to AudioJester's post in the thread Visible gap between the coaxial assembly and enclosure on my Genelec 8351B — does this look normal? with Like.
Just checked my 8361a - no noticeable gap. The big coloured font parts of your post are concerns unique to you, I dont think I have...
-
WhiteBear reacted to illusonic's post in the thread Visible gap between the coaxial assembly and enclosure on my Genelec 8351B — does this look normal? with Like.
0.5mm can look quite dramatic when zooming in close enough. The lines are to scale and exact length is known from powerpoint. There is...
-
WhiteBear reacted to illusonic's post in the thread Visible gap between the coaxial assembly and enclosure on my Genelec 8351B — does this look normal? with Like.
Reminds me of this. Poster was quite upset and got 18 likes for his quality rant. Comments were far less in favor of the product than in...
-
WhiteBear replied to the thread Visible gap between the coaxial assembly and enclosure on my Genelec 8351B — does this look normal?.Thank you very much. I really appreciate that you took the time not only to provide detailed technical explanations and annotated...
-
WhiteBear reacted to NTK's post in the thread Visible gap between the coaxial assembly and enclosure on my Genelec 8351B — does this look normal? with Like.
I found this picture in Genelec's website (link: https://www.genelec.com/mastering/8341a-w371a-stereo-system). I don't think yours looks...
-
WhiteBear replied to the thread Visible gap between the coaxial assembly and enclosure on my Genelec 8351B — does this look normal?.That is a fair criticism. I did have difficulty accepting it, and I wanted to understand whether that reaction was reasonable or whether...
-
WhiteBear reacted to RexrothPigeon's post in the thread Visible gap between the coaxial assembly and enclosure on my Genelec 8351B — does this look normal? with Like.
Yes (but why not just be honest: You don't like it, and you're looking for support for your belief that you shouldn't have to accept...
-
WhiteBear replied to the thread Visible gap between the coaxial assembly and enclosure on my Genelec 8351B — does this look normal?.After reading the replies, I have taken some time to think more clearly about what my concern actually is. I understand the technical...
-
WhiteBear reacted to Andreas007's post in the thread Visible gap between the coaxial assembly and enclosure on my Genelec 8351B — does this look normal? with Like.
I can understand the optical distraction, especially if all stock photos show "perfect" examples (are they really perfect or was PS...
-
-
Loading…
-
Loading…