Tanquen's latest activity

My fix was to put the 6500 back. I tried factory resets on the 6800 but nothing made a difference. It kept dropping any earc signal and...

The shorter one was 16'. I was able to fix all the issues by putting the X6500H back and returning the X6800H.

I see the same message but it was not always there.

I now have the G3 and did have the C9. Seems odd if the issues really are only with a G3/C3 and a Denon 800 series AVR but my X6500H is...

The video blacking out until power cycle can go a day or two without issue. I see it a lot as I use the Apple 4k TV everyday and have it...

Not sure. They are using a new HDMI board and chip set. They removed QMS support and that was to help with black screens when devices...

Be sure to look for eARC issues and dead video out that requires a power cycle to fix every day or so.

My new X6800H has eARC dropouts and the X6500H does not. Not the same issue?

Then this has to be made very clear at this point. If current Denon devices have a jitter problem, it is unlikely to be due to the ESS...

From where I'm sitting, it's completely and totally a fault of the AVR. I could be wrong and there may be a setting in the firmware that...

Anything's possible and digital streaming can be a pain. The one issue I have with saying it's LG or Samsung's fault is the fact that...