stereoplay's latest activity

1.) In the spec sheet they state a tolerance of +-0.5° 2.) When I adjust crosstalk with the Merolemez the crosstalk with the DIN 45543...

I made some more measurements with the same method Balle is using. I adjusted the azimuth of my AT33PTG II with the LB-209 rather than...

Any testing done? I'm very curious...

Yes, tried it on 3 different phono stages. For testing I use always a flat amplifier so I have no problems with RIAA equalization. Do...

No, just searched an old measurement (in recent times I use a more accurate gyroscope):

I have two of them, both have a drop in the right channel...

I love this test record, too. It is one of the best.

I use the crosspower spectrum function: https://www.ni.com/docs/de-DE/bundle/labwindows-cvi/page/cvi/libref/cvicrosspowerspectrum.htm

Another AT-VM95ML: Some frequency response plots and additional plots to this measurements: CBS STR-100: Technics SFC-TR100...

Ah, I see it now. I was not aware of that.

Makes it sense to split up the thread? Going through the pages and search for a specific cartridge is time consuming and some more...

You can do exactly what you proposed to do. Here is an example with a very poor AT12XE with new needle. MM-Input stage capacitance 50pF...