do you mean you don't know how to use eq, like i described here? google equalizer apo and p.e.a.c.e. and follow a youtube tutorial to apply the eq values i provided
I have trouble understanding, why you post EQ settings with low frequency gain, without adjusting preamp, when my provided EQ was perfectly fine.
Don´t add gain without lowering preamp, especially as far as bass is concerned
well, it really doesn´t matter, but my post was quite recent, so you might have noticed that as well as you noticed this...
as far as your issues, check out applying a high pass filter, some audioengineers don´t filter subsonic stuff out in the mix and this triggers dc protection
man, this is a can of worms XD. I appreciate the link, and i´m glad something relatively convenient, like a HP filter can circumvent this. It´s weird that DACs don´t just offer this option by default
so it seems its an issue with low frequencies below 20hz, i applied a highpass filter 10hz Q 0.7 that resolved the issue.
combined with Amirs EQ it looks like this
High pass 10hz Q 0.7
Peak 20hz +6db Q 1.0
Peak 37hz +1.8db Q1.8
Peak 1950hz +4.5db Q 3.0
Preamp -6.5db
so it seems its an issue with low frequencies below 20hz, i applied a highpass filter 10hz Q 0.7 that resolved the issue.
obviously i am on the newest firmware, if you scroll up in this thread, you´ll notice i made a post when 1.25 was released XD
wow, thats super interesting! SHOULD they trigger DC protection though or is this a bad implementation from Topping? I struggle to find a proper alternative at that price, any stack with the same power is at least a hundo more expensive
This is what Topping service has to say about the constant HP ERR issues with the DX3 Pro+ ( Thanks for saving my headphones from burning i guess)
Hi,
Sorry for the delay getting back to you.
Based on the audio file you provided, we have conducted relevant tests. We detected that the bass of...
Hi, this is a bit of a curious observation i made.
I use a Hifiman HE400SE with a DX3 Pro+ and the two work together quite nicely, however everytime i try to listen to the song
even at relatively low volume, the amp shuts down with HP ERR
Doesn´t matter if the source is Tidal or Spotify...