But why does not Denon bother implement support for multi-channel audio streaming into a multi-channel receiver?!? This and way the control software work probably indicate the 2020 Denon AVR software is years behind what's in Yamaha Aventage.
I look here...
I've upgraded from Yamaha RX-A1060 to Denon AVR-X4700H. The new unit is noticeably more compact and lighter. Subjectively the sound improvement is very noticeable on my NAD 804. Those at least 10dB (from RX-A1080 measurements by @amirm) in the measured difference can be heard! I am drawn to my...
An option is XLR-to-RCA cable:
https://www.monoprice.com/product?p_id=4775&gclid=CjwKCAjwyo36BRAXEiwA24CwGSLWVe9J-Ko7yTxjCFllaqMdLSEXQNHgj12En3epA08dixKPHYL9KhoC8NoQAvD_BwE
Please check the wiring before the use on VTV, as there is not 'industry standard'.
I typically listen at a level that prevents talking on the phone, so I have to put on mute. Occasionally, maybe once a month I crank up to the ears pain point.
I'd appreciate any guidance on the following scenario. I consider an upgrade from NAD 804 to either Revel F228Be or Revel F226Be. Revel lists 50-350W as the recommended amplifier power range for F228BE and 50-200W for F226BE. Both speakers have 90dB sensitivity. I want to start with a stereo amp...
The power transistors can run hot and are designed for that.
The electrolytic capacitors are a different story. I wonder what type capacitors are located in the vicinity of the hot areas in those AVRs. Normally each 10C T increase results in 1/2 of the electrolytic capacitor lifespan. As an...