Recent content by kipman725

I'd like to see inside, the boxes are kind of an uncanny valley focus-rite appearance.

quite disappointing IMO. It's not exactly a small module. When you can get things as well: https://www.bluearan.co.uk/index.php?id=JMSQ10 at a lower per channel cost with a case and more power.

Space is one of the most expensive things to own in urban areas (where most people have to live). The accumulation of possessions is also stressful; it takes longer to find the thing you are looking for and moving them around is problematic.

Have you considered the air inside the enclosure is a non linear spring? so eventually as the air volume of the enclosure reduces it will become the dominant source of non linearity. Regardless I wouldn't worry about THD<10% in the frequency range up to 100Hz as its audibility is...

https://www.kartesian-acoustic.com/copie-de-sub120-vhp-1 more high end options.

I recently got this mini PC using an Alderlake N100 CPU...

Incidently on the power required for pro drivers front, we are currently using 4000W/ch and 4ohm drivers to achieve that (nominal) power output but don't reach objectionable levels of driver distortion before clip. So even higher power amplifiers would be useful.

Packaging is a limitation if you want to run much above silicon temperatures. SiC has been demonstrated up to 500C but comercialy available power devices have simlar temp ratings to silicon due to the packaging.

Admark AD442 claims to use GaN: https://www.admarksound.com/power-amplifier/class-d-power-amplifier/ad442-class-d-power-amplifier-4-channel.html

The KX drivers for the soundblaster Audigy allowed access to the internal DSP for stuff like crossovers, PEQ etc. There isn't much anything like it today apart from dedicated standalone DSPs like those from Symetrix and QSC, also some DIY software based solutions but this has latency...

https://jblpro.com/en/site_elements/jbl-professional-sound-system-design-manual-1999-edition-pt-1-1 worth a read for the basics of positioning speakers

The S360 is more of the other way of taking technology from pro speakers (compression drivers) to increase the SPL capability of a home speaker. I'm sure it would do better than most but the SPL capability particularly in the bass will be lacking. It also lacks things like grills, handles...

what about just doing some weight training? and or buying crank stands, wheel board, van ramp ETC. making a loud noise at 30Hz requires big speakers.

edge diffraction differences?

you are kind of adding in a load of extra stuff there I was talking about just the DSP and amps. In terms of amps we are using the 'd' version of these that are slightly cheaper and have analog gain knobs rather than the digital gain controls...