Herbert's latest activity

I know this is a bit Off-Topic, but as we see many speaker classics reviewed I am very eager to see the 3A Audio Design "Midi Master"...

Ooops, correct, red is SPDIF blue seems to be USB. But Amir states in the graph that Toslink measures better than coax. In earlier...

Not in this review. Toslink of the Sanskrit 10th MKII is even a bit better, check the graphs. This is why I am wondering why coax is worse.

So? On galvanically isolated Toslink jitter seems lower. As Coax and Toslink very likely share the same signal path, galvanical...

Could it be that the higher jitter on coax SPDIF is due to a missing isolation transformer? BTW Toslink is limited according high sample...

No one out there to try to cure the hump on the Khadas Tone Board? I might be wrong here, but: The hump can be cured by a correct...

Only "touching" Jazz, the "Köln Concert" is still my favourite, from Walkman over Discman to IPhone. The second CD I ever bought (first...

I assume in Ben´s drawing the altered values in the second stage (between 7-6 and 1-5/2/3 are for correcting the output volume that has...

@Gouwa With the new tone board think about putting the usb-connectors in line with the rim of the pcb! (or in line with the face of the...

It IS. We almost cried. Imagine this for a documentary, that does not use any music (only in the beginning and the end) no narration or...

Honeyland. Watch it.

I´ll start with something rather strange: Edgar Rothermich: "Blade Runner"...

Hm-no one to do the math? I am not deep enough into electronics to calculate the ratio of the changed values. Above Bens calculations...

I should be able to do this. But I need to check if my DAW can produce a testtone from scratch. But maybe there are already files to be...

I have the YEDS-18 Test Disc from Sony, which also has a -60dB Test Signal and digital silence-track. On an older resistor-network based...