Recent content by fricccolodics

Well the question should really have been: Dear M&D, did you manufacture the drivers for ML5909. To my eyes they are 99,9% identical.

I wonder what all the excitement is about, FR is uneven from 150Hz to 1kHz, there is a nasty spike at ~9kHZ, and a big dip at ~2kHz. @amirm corrected the dip with a heavy boost (+4,5dB), which seems like a bad idea distortionwise, because distortion is drastically high at around 1750Hz...

Isn't this is a contradiction to what Benchmark describe on their website: "Most class-D (switching amplifiers) also use push-pull output devices. The push-pull devices in these switching amplifiers make abrupt transitions between full-on and full-off states. These switching transients occur at...

someone send @amirm a suitable cable? ;) i see they are on offer for as little as 1.99 € over here, let's start a fundraiser!

take the 560s ..the longer i have it, the more i value its strengths

IMHO the only difference between cables is the quality of the connectors and the ruggedness of the overall design, so all the cables sound the same except when they are broken...

Superb testing! Thx! Double thx for running the headphone output test! NIce unit with a bit of a high price, but we always have to keep in mind that average income in Japan is 4x the income in China, so prices in the end have to reflect MADE IN JAPAN-circumstances

You tested the LS50 Meta which goes as low as 3.7 Ohms. If you figure in the phase angle, the actual load (EPDR, equivalent power dissipation resistance)the amplifier is facing is around 1.75 Ohms.

as the speakers are calling the shots soundwise and as far as amp power is concerned, it is wiser to spend your money where the sound is and not waste it on useless watts

Of course there will be much variation, but starting out from the measurements we have is the best possible way for any objective analysis. Subjectively they might be perfect for me, who knows, but the given measurement data does not make me inclined to try them out....

Unfortunately there are (still) too many speakers with very demanding impedance drops around

very fine review ! i love to see all possible options tested as done here! h

Great Review! Thanks for taking the time for such extensive measurements!

Not having to eq gives me a wider choice of sources and apart from that: at work i am using a laptop without PEQ possiblity(i am not allowed to install software) and i do not want to use my phone (battery) or my ipod, because my desk is already cluttered with files and food ;)

Vinyl vs. Digital: what do i get ? if we measure those two music reproduction methods the answer seems easy: SINAD of maybe about 60 or 70dB at best vs. 120dB or more. Battle over? No..wait a minute: In my personal listening spot i listen to music with peaks of about 80-85dB SPL (this is really...