Recent content by 312elements

He’s got another one with sphere shaped single drivers but those are crossed over to subwoofers.

Your response was uncivilized at best and now you're putting words in my mouth. I inferred nothing of the sort. Maybe try treating people with dignity and respect and you'll get some in return.

I was going to dare you to move on to another thread if you didn’t have anything valuable to contribute to the conversation but then I remembered that I’m not 12.

@AdamFrandsen have you looked through this thread? @ppataki is fairly far down this rabbit hole (he’s got a few fantastic build threads with one way speakers). https://www.audiosciencereview.com/forum/index.php?threads/fullrange-speaker-project-based-on-markaudio-chr-120.31219/ It’s quite...

I’d go MAOP personally. The 2-way will measure better assuming you get the crossover right, but the MAOP will be harder to mess up and with some EQ can measure well. Not sure if it’s an option, but have you ran the numbers on what sealed box with an 80hz tuning looks like with a subwoofer to...

That plugin isn’t cheap, but appears to be worth it.

How did you settle on that turning frequency? I'm not suggesting that driver isn't capable of working at that frequency in the right enclosure, but if the plan is to crossover to a subwoofer anyway you can make better use of the power and performance by limiting the lower bandwidth in the...

I think this subject in general is documented very poorly and I’m surprised that there aren’t better tutorials from better teachers. Most of the tutorials and even threads associated with topic aren’t helpful. First off the subject of room correction, and crossover design/ bass management...

I had that device and it was pretty awful from an adc standpoint. It actually turned me off of ADC in the signal chain, but it seems like modern hardware has more or less made that a non-issue.

Those exist, but tend to introduce noise if their own.

When I first heard The White Stripes (maybe 2000) I had a real hard time getting into it. It was like I was living the Johnny Be Good scene in Back to the Future. As time passed I really began to appreciate their contribution and to this day I find Jack White to be a musical wizard of sorts.

Are you using lab in or normal in?

The distortion on the prima Luna likely increases as you adjust the volume so I get why you might have a preference here. The NAD c298 that I have has almost 29db of gain and can also be run mono which might increase the gain further, I’m not sure. It’s got no real sound signature of its own so...

Your amp appears to have 32db of gain which is normal so it doesn’t surprise me that other amps require more juice from your preamp to get to the same level. https://www.audiosciencereview.com/forum/index.php?threads/nad-2200-vintage-amplifier-review.13960/

Those drivers have a wide almost 10db peak around 9000hz if I recall but flatten out nicely at about 15 degrees off axis so if it starts to feel bright turn them out into the room a little.