3eaudio's latest activity

@Orosei it can,see this https://audiosciencereview.com/forum/index.php?threads/9-channel-3e-audio-amp-s-project.53855/post-1972345

Hi @activewire great project on multi-channel amp. for Master/Slave setting, if you don't have AM device around then it is NOT...

@daniboun thanks for your great review and share many of your professional diy experience here.

thanks @daniboun the solid cap has less leackage current and then the voltage output still maintain normal that we didn't capture...

yes,OPA1656. you can use same or similar performance one, our purpose use OPA1656 is to maintain the same performance with OPA1612 in...

good question,from general usage case,below 100mA is safe.

it is from manufacture data code,inductor keep no change

RevB change info https://audiosciencereview.com/forum/index.php?threads/3e-audio-tpa3255-260-2-29a-amplifier-review.50208/post-1944367

Hi Amigos want to share some info on Rev B released recently: Input Opamp Change to OPA1556,this is due to part unified that we found...

Hi Amigos want to share some info on Rev B released recently: Input Opamp Change to OPA1556,this is due to part unified that we found...

sorry we had some delay on new batch build and we confirm they will back to stock at 8/April in our aliexpress store.

My amplifier in its final version. Connected to the B&W 602 and the Denafrips DAC the Ares sounds sensational. It is distinguished...

if the root cause is by heat, probably you can improve by lower voltage as the original 35V for opamp will reduce heat with lower supply...

it will be good can share us more technical detail how they define not regulated

I'd like to permanently put to rest all this speculation about TI inhibiting PFFB implementations with patent/licensing...