Basically my layout is fixed, I'm not willing to let go of the window view. I'd be OK with turning the desk a little, which would make surround R placement tricky, or sliding it a few inches (but can't block the door). As you can see, I'm having quite a bit of trouble around 120Hz and trouble in general on most of my L speakers. I was just experimenting with those 4" panels to see what impact it would have on the GRADE reports, they can be moved wherever might be helpful.
Genelec support has been graciously making suggestions, but I don't want to abuse their generosity so thought I'd post here as well.
A few ideas I have:
Genelec support has been graciously making suggestions, but I don't want to abuse their generosity so thought I'd post here as well.
A few ideas I have:
- Run GLM bass management around 40Hz so I can maintain AutoPhase and use Audyssey to crossover at 120Hz with subs placed in a better location to fill the notches
- AutoPhase doesn't work if you run full band, but maybe I can just enter the values manually now that I know what they are?
- mount 1-2 panels on ceiling
- would hate to start drilling holes if I'm wrong about this
- "tighten" the listening area by pulling desk closer to back wall in hopes of more reflections hitting the panels than the window
- past a certain point this would just be ridiculous, maybe even impossible for a 7.x setup
Attachments
Last edited: