• Welcome to ASR. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!

Windows Pure-Tone Audiometry App (Beta) – Track Your Personal FR Baseline & Hearing Trends

Alexander M

Member
Audio Company
Joined
Jan 21, 2020
Messages
67
Likes
8
Our perception of sound is entirely unique. Everyone’s hearing is different from birth, making the way we experience music a deeply personal journey. On top of that, our hearing is constantly changing due to a wide variety of factors.
It’s not just aging, occupational noise, or loud concerts that impact hearing acuity. Temporary or permanent shifts can also be caused by:
  • Past infections, such as otitis media, severe cases of the flu, or COVID-19.
  • Medical factors, including chemotherapy treatments.
  • Trauma and the everyday acoustic stress of living in a major city.
Often, these changes happen so gradually that we adapt to the new reality without even noticing.
Your hearing is the most critical component of any audio system—it is the ultimate end of the chain. We spend years swapping out speakers, headphones, cables, and sources, and we debate mastering nuances and frequency response. Yet, we rarely stop to think about the actual state of our own biological "receiver".
To help music lovers track their hearing health easily and proactively, I developed a self-test pure-tone audiometry app. This project builds on my experience in developing software audio players tailored for users with various hearing profiles.
The app is based on standard medical screening methodology. It sequentially generates pure tones across the tested frequency range at various sound pressure levels (SPL). The test is performed independently for the left and right ears.

What’s in it for an audiophile?
  • Personal Audio Profile Analysis: You get a clear, visual representation of your specific frequency perception.
  • Early Detection: The ability to catch hearing shifts across different frequencies (including low frequencies) before they turn into an obvious issue.
  • An Objective Baseline: A way to understand whether a change in how your system sounds is just listener fatigue, environmental factors, or an actual physiological shift.

How the Test Works
  1. Preparation: You will need a Windows PC, laptop, or tablet; a DAC or sound card with an ASIO driver installed; an external amplifier (if needed); and a solid pair of headphones—ideally with a relatively neutral frequency response. You'll also need to find the quietest room possible to keep the noise floor low.
  2. Calibration: The app includes a reference music track. Using the volume controls in the app and your amplifier, adjust the playback so that the track sounds reasonably loud but perfectly comfortable.
  3. Testing: The app generates tones ranging from 63 Hz to 12,000 Hz. Your goal is to determine your minimum threshold of audibility for each tone. The test is run separately for the left and right ears. Take your time during the test and pause briefly before moving to the next tone.
  4. Results: You will get an audiogram—a chart showing your relative hearing threshold across the frequency spectrum.

Important Disclaimer
This app is not a substitute for a comprehensive professional medical evaluation by an ENT specialist or an audiologist. The accuracy of home calibration depends heavily on your specific headphone model and ambient noise levels. That said, it serves as an excellent tool for initial screening and tracking your hearing trends over time at home.

Help Me Improve the App!
The app is currently in beta testing. I would genuinely appreciate any constructive feedback, measurements, or suggestions you might have.
You can download the beta version here:
Blue vinyl au

The user guide is included, and the app is completely free.
Protect your ears, and let me know your thoughts in the comments below!


 
This app will not produce meaningful information, neither in terms of subjective loudness curves nor dBHL, since they require at minimum SPL calibration and a known headphone/IEM transfer function. In audiometric settings only specific models are used in a set procedure because their interaction with the ear is known.
 
This app will not produce meaningful information, neither in terms of subjective loudness curves nor dBHL, since they require at minimum SPL calibration and a known headphone/IEM transfer function. In audiometric settings only specific models are used in a set procedure because their interaction with the ear is known.
Of course. This app was developed for other purposes.
 
What is the purpose of the app? Is it something like David Griesingers app DGsonicfocus which I use and love.
 
What is the purpose of the app? Is it something like David Griesingers app DGsonicfocus which I use and love.
No, this app is not designed for configuring headphones or other components.

It has two primary purposes:
1. To identify existing anomalies in sound perception. For example, the right ear might have become less sensitive to low frequencies than the left following an ear infection. There are many reasons for changes in spectral sensitivity, and these causes can be highly specific and unstable.
2. To track changes in sound perception over time. There are plenty of reasons for such monitoring as well.
 
Of course. This app was developed for other purposes.
What purpose is that?

What’s in it for an audiophile?
  • Personal Audio Profile Analysis: You get a clear, visual representation of your specific frequency perception.
  • Early Detection: The ability to catch hearing shifts across different frequencies (including low frequencies) before they turn into an obvious issue.
  • An Objective Baseline: A way to understand whether a change in how your system sounds is just listener fatigue, environmental factors, or an actual physiological shift.
It can't deliver on these promises.
 
Can't you make it an online app? I have an apple computer so I can't try it.
 
For you—apparently not; but for me—and for those interested—perhaps.
It can't in an objective sense.

You go to a concert, you want to test for threshold shift. Say you tried the software before and you want to do so again.

There is the consistency of fit for headphones and IEMs, the level of leakage (which affects FR), the level of isolation and room noise (which affects minimum audible pressure), the headphone/IEM response coupling to the ear (which affects FR) and then SPL calibration, which makes the results meaningful.

I would go as far as saying the claims you make are irresponsible and will mislead people about the state of their own hearing.
 
It can't in an objective sense.

You go to a concert, you want to test for threshold shift. Say you tried the software before and you want to do so again.

There is the consistency of fit for headphones and IEMs, the level of leakage (which affects FR), the level of isolation and room noise (which affects minimum audible pressure), the headphone/IEM response coupling to the ear (which affects FR) and then SPL calibration, which makes the results meaningful.

I would go as far as saying the claims you make are irresponsible and will mislead people about the state of their own hearing.
I’m sorry, but either you can’t grasp the purpose of this app, you don’t want to, or you simply enjoy criticizing. In any case, I’m not going to argue with you—I see no point in it.
 
Can't you make it an online app? I have an apple computer so I can't try it.
Unfortunately, no. Developing web apps isn't a hobby of mine. In theory, I could probably create a macOS app, but that would require time and an Apple computer—and I currently have neither :)
 
I’m sorry, but either you can’t grasp the purpose of this app, you don’t want to, or you simply enjoy criticizing. In any case, I’m not going to argue with you—I see no point
Imagine a non-technically inclined person using it, making errors, not understanding the background and then concluding something is wrong with their hearing.

You are bordering on medical advice, particularly when mentioning conditions like otitis media.
 
I would like to emphasize once again that this is neither a medical nor a professional-grade measurement app. It merely allows for a visual, approximate assessment of your current sound perception. For home use, this is perfectly adequate.

Three empirical examples are shown below (the position of each point depends on the number of times the +/- buttons are pressed):
1. Perfectly uniform sound perception
2. Reduced sensitivity in the right ear in the low-frequency range
3. Equal reduction in sensitivity in both ears in the high-frequency range

au-0.png


au-t-Lb.png

au-t-LRh.png
 
I would like to emphasize once again that this is neither a medical nor a professional-grade measurement app. It merely allows for a visual, approximate assessment of your current sound perception. For home use, this is perfectly adequate.

Three empirical examples are shown below (the position of each point depends on the number of times the +/- buttons are pressed):
1. Perfectly uniform sound perception
2. Reduced sensitivity in the right ear in the low-frequency range
3. Equal reduction in sensitivity in both ears in the high-frequency range

View attachment 563105

View attachment 563106
View attachment 563107
Take out the medical language and other claims in the first post that suggests more rigor than possible without controls, add details about where errors could come from and how audiologists ensure accurate audiograms, and we have nothing to argue about.

Uncalibrated, uncertified headphones often have left/right disparity in driver FR seen on measurement fixtures, and further disparity is introduced by fit due to most people's commonly asymmetrical anatomy—in that situation your app will present that reported difference as a problem in the user's hearing.

An increased LF threshold, if it is not caused by fit issues or headphone problems, typically indicates Meniere's disease, which is significant and serious. This is not casual information. There is no such thing as random threshold shifts in a random part of the frequency range.

You don't want to put your users in a situation where they are trying to diagnose themselves. It's not enough to have a small disclaimer at the end without explaining to users where things might go wrong.
 
You don't want to put your users in a situation where they are trying to diagnose themselves. It's not enough to have a small disclaimer at the end without explaining to users where things might go wrong.
You could make the same argument about many other tools. Eg using a multimeter to diagnose an electrical fault without a degree in electrical engineering.

Let users do what they want.
 
You could make the same argument about many other tools. Eg using a multimeter to diagnose an electrical fault without a degree in electrical engineering.

Let users do what they want.
Big difference between a device and your body.

I see the claims about what the app can do equivalent to the claims made by typical audiophile companies. Not careful, and a mix of truth and "marketing".

And users will always do what they want. It's the company with a product that needs to be held to a higher standard.
 
Back
Top Bottom