• Welcome to ASR. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!

What Speakers Would You Like Amir To Measure Next?

Interested by a test of the Denton 1S coaxial too. (too bad there is no active version released - maybe later ?)

And even more interested by a test of the Cambridge Audio L/R Series, especially the top of the range L/R X :

They're very nice, technically they look like sorts of Ascilab all active, integrated and connected, in a small scale format and with proprietary drivers.
All this from from a well established european brand, with a relatively modest price tag considering technology and style involved.
As George Clooney would have said : What Else ?
 
Seconding the above speaker, but I'd also love to see reviews of some smaller but well regarded floorstanders. There haven't been as many of those reviewed, particularly recently. I'm especially interested in the Kef Q7 (and Q11, but that's been reviewed by Erin already) as well as anything else that might be an under the radar choice in that $2k-2.5k price range.

In addition, a proper review of the Ascend ELX would be very nice to see, since that's their flagship speaker at the moment, and I'd love to see the AMT version of the Philharmonic BMR monitor measured (as well as their new Cantabile).
 
Harbeth Monitor 40 (especially original version)
Gradient Revolution
Mangar Zerobox 109 (or any other Mangar speaker)
Eminent Technology LFT-8b
I just bought a Mangar Zerobox 109 (emphasis on the 1) last night. When I read it was using transverse waves to push out compression waves, this illness forced me to purchase the speaker even though it's obviously seen better days. I do have a calibrated mic or two. But I have no idea what I'm doing so obviously I'd love to drop it off to Amir as well. But if there was something I can test you want to know, I'll try it. In exchange can you find me another one?
1000048228.jpg

#002296

20W-100W
Made in Germany. Quite heavy.
 
I snagged a set of Denton 1S and can ship them for a review, I'm just not sure I'll want them back yet LOL. They have some great qualities, but for some reason they present an intolerably bright sound for my ears in my space without EQ. To be fair, pretty much all speakers do sound bright to me, but I perceive these as particularly harsh without doing a lot of work to fine-tune them. For the most part, that work is worth the effort.

I'm getting an error when I reply directly, but I switched from LS50 Metas to these. It seems that the Dentons, as one might expect because of the larger size, seem to surround me with sound more, there is a tight image, especially for vocals and lead guitar type sounds, but the LS50s have an edge in laser precision accuracy, but these seem more forgiving and less fussy around placement, and I prefer them because I wanted to feel more enveloped by the sound. Don't ge me wrong, they totally disappear into the sound, I had to lean into one of them today to make sure it was on. I really don't have much experience listening to quality speakers, so take what I'm saying with a grain of salt, or three. I'm only describing my experience of them in my space, measurement-wise I see a pretty steep roll-off with a peak around 2kHz that I have to pull down A LOT, but again those are measurements in my space which has some physical acoustic treatment but is far from anechoic, nechoic, echoic, choic, oic, ic...
 
Last edited:
I'm only describing my experience of them in my space, measurement-wise I see a pretty steep roll-off with a peak around 2kHz that I have to pull down A LOT, but again those are measurements in my space which has some physical acoustic treatment but is far from anechoic, nechoic, echoic, choic, oic, ic...
Thank you for your above review, could you maybe upload here some comparative listening position measurements of both, maybe we can even see the reason of your perceived brightness.
 
I snagged a set of Denton 1S and can ship them for a review, I'm just not sure I'll want them back yet LOL. They have some great qualities, but for some reason they present an intolerably bright sound for my ears in my space without EQ. To be fair, pretty much all speakers do sound bright to me, but I perceive these as particularly harsh without doing a lot of work to fine-tune them. For the most part, that work is worth the effort.

I'm getting an error when I reply directly, but I switched from LS50 Metas to these. It seems that the Dentons, as one might expect because of the larger size, seem to surround me with sound more, there is a tight image, especially for vocals and lead guitar type sounds, but the LS50s have an edge in laser precision accuracy, but these seem more forgiving and less fussy around placement, and I prefer them because I wanted to feel more enveloped by the sound. Don't ge me wrong, they totally disappear into the sound, I had to lean into one of them today to make sure it was on. I really don't have much experience listening to quality speakers, so take what I'm saying with a grain of salt, or three. I'm only describing my experience of them in my space, measurement-wise I see a pretty steep roll-off with a peak around 2kHz that I have to pull down A LOT, but again those are measurements in my space which has some physical acoustic treatment but is far from anechoic, nechoic, echoic, choic, oic, ic...
German magazine Hi-Fi Test reviewed the Wharfedale Denton 1S and got some basic measurements (only horizontal).
I can't find any info if these measurements are taken with or without the grille and which position (Norm or Max) of the brilliance switch on the back.


Blue = 0 degrees
Green = 15 degrees
Red = 30 degrees

wharfedale-denton-1s-lautsprecher-stereo-86124.jpg
 
Thank you for your above review, could you maybe upload here some comparative listening position measurements of both, maybe we can even see the reason of your perceived brightness.
If these are too small I can embiggen them and repost. This room is about 10'x11', I took measurements from a little over 3' away, then 5', then 7', with no EQ at all, and without subwoofers first and then again with 3 mismatched not-particulary-good subwoofers and a crossover at 70Hz processed by BluOS. The room is more or less like this:
1786365978041.png


And this is what I got:
1786366012540.png

I'm going to get raked over the coals now, aren't I? I'm sure I did a number of things in a non-ideal way, and look forward to having that pointed out repeatedly :)
EDIT: the subwoofer levels to get the bass that high are a couplde of steps above normal, it's way too bassy, but it makes the measurement look nice?
 
Back
Top Bottom