• Welcome to ASR. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!

What speakers do you currently own?

My own seas 3way diy design. Passive crossover
 

Attachments

  • FB_IMG_1707534499927 (2).jpg
    FB_IMG_1707534499927 (2).jpg
    200.4 KB · Views: 95
Not exactly a popular brand here but Totem Forest and Model 1 for center.

I wanted a small good looking tower with enough bass that was available near me and the Forest fit the criteria and sounded more neutral than other Totems to my ears. I came to appreciate it more as I've been messing around with dirac. The Model 1 is nowhere as good but I got it mostly for its matching looks with the Forest and luckily dirac has been effective.
 
Living room:
Revel F228Be
2x Velodyne DD18

Home cinema:
Front: Revel F208
Center: Revel C426Be
Surrounds: Monitor Audio Silver FX
Subwoofer: Velodyne DD18 Plus

Bedroom:
Revel M16

I also have these:
Monitor Audio RX1
XTZ Spirit 4
Dali Zensor 1 AX
Infinity Primus 150
B&W 686 S2
Audio Pro T14
 
I have forgotten half of the model names on my speakers, had to look them up
HT full of JBL Pro, fully treated and with front baffle wall
Surrounds JBL 8320
Atmos JBL control 25-1 (i think)
Subs 3 x JBL 445C
LCR Diy with JBL 2216 and JBL 2453H-SL

At work i have JBL 306P mk2
 
Wondering if Philharmonic people provided specs of this True Mini Air speakers?
Not as far as I know. I have my Audyssey measurement graphs, but those are obviously room dependent. There's the driver chart from SB Acoustic, but that's not with the built enclosure. I assume you're also asking on the AVS thread, so hopefully they'll respond one place or the other.
 
Not as far as I know. I have my Audyssey measurement graphs, but those are obviously room dependent. There's the driver chart from SB Acoustic, but that's not with the built enclosure. I assume you're also asking on the AVS thread, so hopefully they'll respond one place or the other.
I haven't posted anything there, and I could find anything searching there. Would be helpful if you could share the link.
With 3 Ohm DC resistance and 4 Ohm nominal impedance, have these worked fine with your AVR?
 
Living room- KEF R 11 Metas x 2, Benchmark AHB2 x 2, KEF KF92 subs x 2, MiniDSP Flex HTx, Sonos port

Dining room- KEF LS50 II wireless x 2, KEF KC62 subs x 2

Lounge- KEF R3 Metas x 2, KEF Kube 12 MIE subs x 2, Benchmark AHB2 x 1, MiniDSP Flex, Sonos port

Kitchen- Devialet Phantom Ultimate 108dB x 2, Phantom Ultimate 98 dB x 1

TV- Devialet Dione soundbar

I'm really happy with all of these. I'm certainly not a "critical" listener, however, and mostly am playing music while doing other things. I love the KEF stuff, but if I had it to do over again I'd probably just get Devialet Phantom Ultimate 10dB for every room. It's crazy how much sound they put in those tiny speakers. I don't do a lot of movies, generally listen at chill levels. The Dione is good for what it is.
 
I haven't posted anything there, and I could find anything searching there. Would be helpful if you could share the link.
With 3 Ohm DC resistance and 4 Ohm nominal impedance, have these worked fine with your AVR?
No issues with my AVR (Denon X1800H). I've got a 100Hz crossover (IIRC) and have reduced the trim level since they're relatively close, but they are working very well in casting a wide bubble. Seamless integration to the front speakers.

Here's a recent post in the AVS forum, asking a similar question:

 
My own seas 3way diy design. Passive crossover
Ooooh!
Did you even design and then DIY'd the XOs, yourself??
I don't know if the details and measurements (if any) would be OT here but I sure would like 'hear' about them.:cool:
 
ELAC Corina 243.3 / SVS SB 2000 x 2

ELAC Debut 2.0 F6.2 / SVS SB 3000 Micro x 2

 
Rosso Fiorentino Pienza 2 mains, Chario Balbo center, 2 Sigberg 10 D subs.

Interesting that’s a bit of an exotic brand for around here.

I’d like to see some photos too if it’s not inconvenient.
 
Back
Top Bottom