• Welcome to ASR. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!

UGreen Max5c: $25 NC Headphone Review

Rate this noise cancelling headphone:

  • 1. Poor (headless panther)

    Votes: 7 3.9%
  • 2. Not terrible (postman panther)

    Votes: 22 12.3%
  • 3. Fine (happy panther)

    Votes: 86 48.0%
  • 4. Great (golfing panther)

    Votes: 64 35.8%

  • Total voters
    179
This makes me suspect that the app does more than simply configure a setting stored on the headphones, although I haven't established exactly how it works.
It wouldn't be the first time a cheap Chinese device is used as a backdoor...
 
The app sets it on the headphones. I just paired to another phone that doesn't have the app and it shows as using LDAC
 
I just paired it with my FiiO M7 and LDAC is working. That's a good thing because I'm not sure if it's possible to side load the app on the M7.

Why would UGreen not ship the headphones with LDAC turned on?
 
RE: LDAC You'd expect the headphones to negotiate the highest-quality supported codec automatically, or at least let you select it directly in the phone's Bluetooth settings, rather than making it dependent on the companion app. Pretty unintuitive, if you ask me.
Most every Bluetooth headphone I own isolates LDAC and requires user intervention in the app to enable it. That is, it is off by default and requires app intervention on 1st use. So, the UGREEN is not unique.

This makes sense to me. LDAC may provide the best sound quality when your Bluetooth connection is robust, but it provides the least stability when the connection is poor. In addition, it lowers the playtime because of its higher overhead and usually eliminates some features like multipoint connection and certain EQ/Spacial modes.

While it might be nice to have a dedicated LDAC button, my guess is most users are more likely to notice dropouts or the inability to connect to multiple devices, than will notice the sound difference. I expect LDAC Hi-Res labeling is something lots of people want when purchasing but that they do not use once the headphone is owned.
 
Most every Bluetooth headphone I own isolates LDAC and requires user intervention in the app to enable it. That is, it is off by default and requires app intervention on 1st use. So, the UGREEN is not unique.

This makes sense to me. LDAC may provide the best sound quality when your Bluetooth connection is robust, but it provides the least stability when the connection is poor. In addition, it lowers the playtime because of its higher overhead and usually eliminates some features like multipoint connection and certain EQ/Spacial modes.

While it might be nice to have a dedicated LDAC button, my guess is most users are more likely to notice dropouts or the inability to connect to multiple devices, than will notice the sound difference. I expect LDAC Hi-Res labeling is something lots of people want when purchasing but that they do not use once the headphone is owned.
I beg to differ. Most of the Bluetooth headphones and audio devices I own that support LDAC don't require a dedicated companion app to enable it. Once paired, LDAC can simply be selected or deselected through Android's native Bluetooth settings, without having to install or configure the manufacturer's app.

Just to give a few examples, I own the 1MORE SonoFlow, Sony WH-1000XM2, HiBy W3, FiiO BTR7, FiiO JM21 and several others. None requires a companion app to activate LDAC.

For illustration, here's a screenshot of my SMSL DL200 connected to my phone, with LDAC selected and actively in use, entirely through Android's own Bluetooth settings.

Granted, LDAC isn't necessarily enabled by default, and for good reason. Manufacturers and Android often favour the more universally compatible codecs initially, since LDAC's higher bitrate can come at the expense of connection stability and battery life. The user may therefore need to enable it manually. But that's precisely the point: this can be done directly through Android's native Bluetooth settings.

With the UGREEN HiTune Max5c, however, I haven't found any way to enable LDAC without first installing the UGREEN Audio companion app. To make matters worse, the app repeatedly prompts you to sign in or create an account, which seems entirely unnecessary just to enable a standard Bluetooth codec.

Of course, manufacturers may use their companion apps to expose additional codec options or provide proprietary configuration features. But that's quite different from making the app a prerequisite for enabling LDAC itself. In my experience, LDAC activation is handled perfectly well by Android's native Bluetooth stack, provided both devices support the codec. That's precisely why I find UGREEN's approach somewhat unusual.

Screenshot_20261030_150600_Settings.jpg
 
Last edited:
I beg to differ. Most of the Bluetooth headphones and audio devices I own that support LDAC don't require a dedicated companion app to enable it. Once paired, LDAC can simply be selected or deselected through Android's native Bluetooth settings, without having to install or configure the manufacturer's app.

Just to give a few examples, I own the 1MORE SonoFlow, Sony WH-1000XM2....
My error. On rechecking my Pixel 10 Pro is nearly unique in not supporting LDAC so the menu choices do not appear as they should. I do not know where they most often appear in the latest headphones on Android 17. I know there has been a move toward more integration with the apps rather than requiring users to go into Android submenus.

OTOH, my real beef with your post was the suggestion that LDAC should be on by default, which it appears you no longer insist on.

While installing an app may seem a hassle, not accessing LDAC seems to me to be among the tiniest problems faced by not installing one. For the UGREEN, You also cannot get firmware updates, adjust EQ and spatial settings, turn on/off game mode and multi-point.

UGREEN has one of the most rudimentary apps, with the least control. You lose a lot more options with most other brands. These features may not matter to you compared to app installation hassle, but I expect you are in the minority on that.
 
My error. On rechecking my Pixel 10 Pro is nearly unique in not supporting LDAC so the menu choices do not appear as they should. I do not know where they most often appear in the latest headphones on Android 17. I know there has been a move toward more integration with the apps rather than requiring users to go into Android submenus.

OTOH, my real beef with your post was the suggestion that LDAC should be on by default, which it appears you no longer insist on.

While installing an app may seem a hassle, not accessing LDAC seems to me to be among the tiniest problems faced by not installing one. For the UGREEN, You also cannot get firmware updates, adjust EQ and spatial settings, turn on/off game mode and multi-point.

UGREEN has one of the most rudimentary apps, with the least control. You lose a lot more options with most other brands. These features may not matter to you compared to app installation hassle, but I expect you are in the minority on that.
I think you've misunderstood my original point. I never suggested that LDAC should be enabled by default. Quite the opposite: I explicitly acknowledged that it generally isn't, probably for good reasons relating to compatibility, connection stability and battery consumption.

My point, which seems to have got lost in this discussion, is that manually selecting LDAC and having to install a manufacturer's companion app just to make that selection possible are two entirely different things. On the Bluetooth devices I've mentioned, provided both the phone and the audio device support LDAC, the LDAC toggle is already there in Android's native Bluetooth device settings, switched off by default but available to turn on whenever the user wants. No additional app, configuration or account is required.

As for the additional features you mention, I haven't disputed their usefulness. EQ, spatial settings, game mode and multipoint are legitimate reasons to install a companion app if you want to use them. Firmware updates are another matter altogether: using a manufacturer's app to download and install firmware is perfectly understandable, but that's an entirely separate function and has nothing to do with enabling a standard Bluetooth codec.

So this isn't about rejecting companion apps or claiming they serve no purpose. It's about questioning why an app should be a prerequisite for something that Android's Bluetooth stack can already handle natively.

Finally, your assertion that I'm in the minority for finding this unnecessary is speculative unless you have some evidence to back it up. In any case, how popular companion apps are is beside the point. It doesn't address the distinction I'm making.
 
I've been using them for almost half a year now. My first bluetooth headphones ever (never thinking about this possibility, I even bought my LG V60 from Ali with the clear Intention of driving something wired), so I didn't know what to expect. With tuning they are pleasant, mostly indistinguishable from my AKG K371. ANC is helpful, no wind protection on the mics isn't.

They are constantly chipping away. The big break happened almost immediately, in a couple of weeks, on both of the ears. So I don't know how long they will live. Probably not long enough to justify the savings, but hey, I wear them 24/7. Literally.
 

Attachments

  • IMG_31-10-2026_23-31-40_V60.xml.jpg
    IMG_31-10-2026_23-31-40_V60.xml.jpg
    81.6 KB · Views: 53
Looks like it might be repairable with some glue
 
The headphones are well-built, sit comfortably and certainly don’t give the impression of a product where corners have been cut at every turn.

PXL_20261102_143843303.jpg


PXL_20261102_144106234.NIGHT.jpg


PXL_20261102_144118628.NIGHT~2.jpg


Whilst the measurements from Audio Science Review show that the tuning is by no means perfect and that there are deviations, particularly in the bass and lower treble ranges, overall it’s easy to see why these headphones can be taken seriously in terms of sound quality, even outside their actual price range.

I haven’t needed the UGREEN app so far, as I’m already very happy with the headphones as they are.

I find the physical buttons very convenient to use. Volume, playback and ANC can be controlled without having to tap around on a smooth surface and hope that the headphones have recognised the correct gesture.

PXL_20261103_092511851.NIGHT.jpeg


Bluetooth pairing went smoothly and the connection is stable for me.

Even the active noise cancellation isn’t just a tick on the features list – it actually works and effectively reduces steady ambient noise. Of course, I wouldn’t put it on a par with the top-of-the-range models from Bose, Sony or Apple, but given the headphones’ total cost of 21 euros, I’ve got little to complain about.

The ear pads are soft, the headphones sit securely without causing any uncomfortable pressure, and their weight remains comfortable even during prolonged use.

PXL_20261103_092611418.NIGHT~2.jpg


For me, they’re the perfect headphones for streaming in the evening, when you don’t want to disturb your wife and dog with three big subwoofers.
Even if you have an electric piano that can be paired via Bluetooth, these headphones are comfortable, although they aren’t my first choice.

PXL_20261103_085148520.NIGHT.jpg


PXL_20261103_085217666.NIGHT.jpg
 
Most every Bluetooth headphone I own isolates LDAC and requires user intervention in the app to enable it. That is, it is off by default and requires app intervention on 1st use. So, the UGREEN is not unique.

This makes sense to me. LDAC may provide the best sound quality when your Bluetooth connection is robust, but it provides the least stability when the connection is poor. In addition, it lowers the playtime because of its higher overhead and usually eliminates some features like multipoint connection and certain EQ/Spacial modes.

While it might be nice to have a dedicated LDAC button, my guess is most users are more likely to notice dropouts or the inability to connect to multiple devices, than will notice the sound difference. I expect LDAC Hi-Res labeling is something lots of people want when purchasing but that they do not use once the headphone is owned.

I've been using them for almost half a year now. My first bluetooth headphones ever (never thinking about this possibility, I even bought my LG V60 from Ali with the clear Intention of driving something wired), so I didn't know what to expect. With tuning they are pleasant, mostly indistinguishable from my AKG K371. ANC is helpful, no wind protection on the mics isn't.

They are constantly chipping away. The big break happened almost immediately, in a couple of weeks, on both of the ears. So I don't know how long they will live. Probably not long enough to justify the savings, but hey, I wear them 24/7. Literally.

"With tuning they are pleasant, mostly indistinguishable from my AKG K371"

That's really good to know, as I thought I'd get myself a new pair today for £23 off Amazon. As a K371 owner, if I can get them to sound close to those I'll be very happy. Not an essential purchase, more out of curiosity and something to tinker with.

I did own the K371BT Bluetooth version but they were very disappointing. The pads were shallower than the wired K371 ones plus there were periodic, faint, electronic blips from both drivers, along with creaking from the left earcup. The codec choice was disappointing too, just SBC and AAC.

They were returned pronto!
 
Just got a pair in the mail.
Turning on spatial sounds effects switches the EQ preset to classic and brings the bass back and then some.
Switching EQ settings turns it off again, so would have to be re-applied afterwards but it will switch back to classic with spatial sounds effects.

Might have been mentioned before but didn't see it when skimming the thread.
Will play around with Amir's measurements for now but if someone has measurement data of the headphones in classic with spatial sounds on do share! :D
 
Last edited:
These UGreen Max5c headphones arrived today and I'm truly delighted with them. How the blazes do they make a profit on them when they're only £23 on Amazon UK?!

They're really nicely made too and super comfy, with memory foam and pleather earpads and a soft foam and pleather headband. There are two USB cables in the package as well.

Spacial effects are somewhat limited but that's very typical with closed cans. The overall sound quality is splendid though, but no match for my Hifiman Edition XS and other favourites in my collection. Keep your expectations realistic and you'll no doubt be pleasantly surprised.

Unlike for others on here, LDAC works fine without the UGreen app on my Motorola Edge 60 Pro with Android 16:

1000061443.jpg


After installating the UGreen app:

1000061422.jpg


I then used Bluetooth Codec Changer to make sure that the LDAC bit rate was set to 990k. It's a really decent app BTW. (My screenshot looks really blurred when uploaded, despite being only 737k it's been recompressed):

1000061429.jpg


I then applied Amir's parametric EQ settings in USB Audio Player Pro and saved it:

1000061432.jpg


Happy days! :D

Thanks to Amir and everyone else who contributed useful info to this thread.
 
Last edited:
I beg to differ. Most of the Bluetooth headphones and audio devices I own that support LDAC don't require a dedicated companion app to enable it. Once paired, LDAC can simply be selected or deselected through Android's native Bluetooth settings, without having to install or configure the manufacturer's app.

Just to give a few examples, I own the 1MORE SonoFlow, Sony WH-1000XM2, HiBy W3, FiiO BTR7, FiiO JM21 and several others. None requires a companion app to activate LDAC.

For illustration, here's a screenshot of my SMSL DL200 connected to my phone, with LDAC selected and actively in use, entirely through Android's own Bluetooth settings.

Granted, LDAC isn't necessarily enabled by default, and for good reason. Manufacturers and Android often favour the more universally compatible codecs initially, since LDAC's higher bitrate can come at the expense of connection stability and battery life. The user may therefore need to enable it manually. But that's precisely the point: this can be done directly through Android's native Bluetooth settings.

With the UGREEN HiTune Max5c, however, I haven't found any way to enable LDAC without first installing the UGREEN Audio companion app. To make matters worse, the app repeatedly prompts you to sign in or create an account, which seems entirely unnecessary just to enable a standard Bluetooth codec.

Of course, manufacturers may use their companion apps to expose additional codec options or provide proprietary configuration features. But that's quite different from making the app a prerequisite for enabling LDAC itself. In my experience, LDAC activation is handled perfectly well by Android's native Bluetooth stack, provided both devices support the codec. That's precisely why I find UGREEN's approach somewhat unusual.

View attachment 568181

They work fine for me. Motorola Edge 60 Pro, Android 16, and no UGreen app installed:

1000061443.jpg
 
They work fine for me. Motorola Edge 60 Pro, Android 16, and no UGreen app installed:
Thanks for this. I do have an update that to some degree contradicts your analysis.

I no longer have a Ugreen Max 5c, but I do have a Ugreen Max 5s which I think is nearly identical but with Bluetooth updated to 6.0 and perhaps a few other tweaks.
In the Ugreen app there is an option called "Intelligent HD Decoding" under the "Hi Res Decoding" category. When turned on, the connection briefly pauses and switches to LDAC. Turned off on my Pixel 10, it switches to AAC. I do not know whether the IntelHDDec is default on or off.

When IntelHDDecoding is OFF in the UGREEN APP, the nice Bluetooth Codec Changer app no longer lets me choose LDAC, but it will switch between AAC and SBC. When IntelHDDecoding is ON in the UGREEN APP, BCC app allows me to switch between all three. SO, on the Max 5s the Ugreen app overrides the Codec Changer App.

In any case, there is no setting in Android 17's Bluetooth connection that allows me to switch (I do remember it being there in older Android versions. So, you could use the UGREEN app once to update firmware and enable LDAC, but you would still need another app like BCC to turn it on and off.

AND, the Current top of the line Sony M1000X Conexxion works exactly the same way. with its Sony Sound Connect app. When LDAC is allowed in the Sony App, then the Bluetooth Codec Changer app can switch the headphone in and out of LDAC. But, if it is off in the Sony app, it does not appear as an option in the Changer app. And, the option to switch codecs never appears in the Android 17 Bluetooth connection options.

SO, Whether LDAC is by default available or not, I do not know. I do know the ability to switch it off and on (once it is made available in the brand's app)...seems to require an app of some sort. You might check with a MAX 5c to see if that responds as mine do.

My guess is that most people do not care and will use the brand app at least a little as it allows for other options. The Bluetooth Changer App is nice, but it is not just a simple switch (it can, with a premium license, do a lot of other things like EQ). Of course, it as you note, works with lots of headphones if LDAC is enabled.
 

Attachments

  • Ugreen1s.jpg
    Ugreen1s.jpg
    109.1 KB · Views: 17
For anyone here looking to apply Amir's parametric EQ settings (or any other Equalizer APO / Peace profile) system-wide on Android via Wavelet, I built a small, free browser-based converter that turns APO configurations directly into a 127-band GraphicEQ.txt file:

https://eqapo-to-wavelet.gapski.workers.dev/?lang=en

Since a few folks in this thread mentioned using UAPP or tinkering with EQ on their phones to fix the stock tuning of the Max5c, this makes it quick to bring desktop PEQ profiles over to Wavelet for streaming apps without messing with Python scripts.

A few quick details:
  • Runs 100% locally in your browser: Nothing is uploaded to a server.
  • Format support: Accepts config.txt, peace.txt, or ParametricEQ.txt (file upload or direct text paste).
  • Frequency response preview: Plots the original PEQ curve against the smoothed 127-band Wavelet output so you can verify the fit before exporting.
  • Sample rate & preamp: Lets you select the target sample rate (44.1 / 48 / 96 / 192 kHz) and auto-normalizes the output to −0.1 dB to prevent digital clipping.
  • Open source & zero dependencies.
Just paste Amir's filter values in standard APO format, download the generated GraphicEQ.txt, and import it in Wavelet (AutoEQ → GraphicEQ → Import).

Hopefully, some of you find it useful for dialing in the Max5c!


 
For anyone here looking to apply Amir's parametric EQ settings (or any other Equalizer APO / Peace profile) system-wide on Android via Wavelet, I built a small, free browser-based converter that turns APO configurations directly into a 127-band GraphicEQ.txt file:

https://eqapo-to-wavelet.gapski.workers.dev/?lang=en

Since a few folks in this thread mentioned using UAPP or tinkering with EQ on their phones to fix the stock tuning of the Max5c, this makes it quick to bring desktop PEQ profiles over to Wavelet for streaming apps without messing with Python scripts.

A few quick details:
  • Runs 100% locally in your browser: Nothing is uploaded to a server.
  • Format support: Accepts config.txt, peace.txt, or ParametricEQ.txt (file upload or direct text paste).
  • Frequency response preview: Plots the original PEQ curve against the smoothed 127-band Wavelet output so you can verify the fit before exporting.
  • Sample rate & preamp: Lets you select the target sample rate (44.1 / 48 / 96 / 192 kHz) and auto-normalizes the output to −0.1 dB to prevent digital clipping.
  • Open source & zero dependencies.
Just paste Amir's filter values in standard APO format, download the generated GraphicEQ.txt, and import it in Wavelet (AutoEQ → GraphicEQ → Import).

Hopefully, some of you find it useful for dialing in the Max5c!



Hi there.

This is a really useful tool and the interface is excellent. Great work!

I'd much rather be able to apply a system-wide EQ and I already use Wavelet for this purpose when using my Bluetooth headphones. I noticed there was no EQ for the Ugreen Max5c, so its most welcome addition.

1000064005.jpg


It worked a treat. Thanks! :D
 
Last edited:
Back
Top Bottom