sebdhaese
Member
Hi, I am designing a speaker for the first time and would like some feedback on my design before I actually build it.
Some additional info:
- Outer wall will be 36mm/1.4 inch thick and lined with 5cm/2 inch acoustic rock wool.
- Tweeter: Tang Band RT-2202S Aluminum Ribbon Tweeter (https://www.soundimports.eu/nl/tang-band-rt-2202s.html)
- Woofers: Tang Band W6-1721 6-1/2" Underhung Midbass Driver (https://www.soundimports.eu/nl/tang-band-w6-1721.html)
- Amp and DSP crossover: Hypex FA253 2 x 250 + 100 Watt FusionAmp (https://www.soundimports.eu/nl/hypex-fa253.html)
- Lower woofer tuned from 50Hz - 500Hz; Top woofer from 500Hz to 2500Hz and Tweeter from 2500Hz to 30000Hz
- Ports in red on drawing (not really sure about length?). Ported at the bottow in the hope of closer wall placement.
- Drawing:
Hoping for some good feedback
Some additional info:
- Outer wall will be 36mm/1.4 inch thick and lined with 5cm/2 inch acoustic rock wool.
- Tweeter: Tang Band RT-2202S Aluminum Ribbon Tweeter (https://www.soundimports.eu/nl/tang-band-rt-2202s.html)
- Woofers: Tang Band W6-1721 6-1/2" Underhung Midbass Driver (https://www.soundimports.eu/nl/tang-band-w6-1721.html)
- Amp and DSP crossover: Hypex FA253 2 x 250 + 100 Watt FusionAmp (https://www.soundimports.eu/nl/hypex-fa253.html)
- Lower woofer tuned from 50Hz - 500Hz; Top woofer from 500Hz to 2500Hz and Tweeter from 2500Hz to 30000Hz
- Ports in red on drawing (not really sure about length?). Ported at the bottow in the hope of closer wall placement.
- Drawing:
Hoping for some good feedback