• WANTED: Happy members who like to discuss audio and other topics related to our interest. Desire to learn and share knowledge of science required. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!

Topping MX3 or NAD D 3020?

villason

Member
Joined
Jul 3, 2019
Messages
44
Likes
13
Is the NAD much better performing than the topping? Reading NAD D 7050 review in this site looks like not much if any. What I like of the topping is the small form factor bit I would be willing to compromise if the NAD is much better performing.
 

somebodyelse

Major Contributor
Joined
Dec 5, 2018
Messages
3,682
Likes
2,959
Which version of D3020? The original used hypex amps, most likely the UcD32OEM which is by far their worst measuring one. The datasheet puts it in the same ballpark as the MX3 review here. I think the v2 used different amps.
 
OP
V

villason

Member
Joined
Jul 3, 2019
Messages
44
Likes
13
Which version of D3020? The original used hypex amps, most likely the UcD32OEM which is by far their worst measuring one. The datasheet puts it in the same ballpark as the MX3 review here. I think the v2 used different amps.

V2.
 

andreasmaaan

Master Contributor
Forum Donor
Joined
Jun 19, 2018
Messages
6,652
Likes
9,399
Not sure which versions were measured here and here, but there you go.

Certainly measures better than the MX3.
 
Top Bottom