Topping E50 II DAC is up on the Topping Store

[Pausi]

A friend wants to buy this DAC (so he can control some things with a tablet), but he's concerned about how much the volume must be lowered to put it to 4v output or slightly below. Anyone know?

Just adjust the pregain setting according to the gain setting on your amplifier to prevent clipping. Use lowest gain setting on the amp (in dB) to get to the max amp effect. If you don't know how to calculate this use a free AI/LLM to calculate for you. Put in the values and it will give you the correct amount of dB you must lower. Remember to include in the calculation possible EQ-setting also.

 

[Pulkass]

It is not up on the Topping site as well:

E50 II - Power, Refined in Compact Form - Topping audio

TOPPING, born in 2008, has evolved into a beloved global HIFI brand favored by users worldwide. We firmly believe that higher-quality music playback devices are essential for truly showcasing the allure of music. By investing extensively in professional technology and exceptional industrial...

topping.audio

Need a cable to better (!) power the Topping E50ll . This is my 5 volts stable power supply. Can l find such aeronautics one end- to usb C ???

 

[linuxfan]

@Pulkass I doubt there's an off-the-shelf cable that matches your requirements.
I suggest you make your own - get a USB-C cable, cut one end off to expose the 5V +ve wire and GND wire, then buy a 2-pin circular plug -
https://au.rs-online.com/web/p/industrial-circular-connectors/1115754
and solder together.

 

[Pulkass]

@Pulkass I doubt there's an off-the-shelf cable that matches your requirements.
I suggest you make your own - get a USB-C cable, cut one end off to expose the 5V +ve wire and GND wire, then buy a 2-pin circular plug -
https://au.rs-online.com/web/p/industrial-circular-connectors/1115754
and solder together.

Thanks

 

[Pulkass]

I recently bought the Topping E50II. I'm really surprised by how good the sound quality is; it's incomparable to previous AKM-based DACs. The AK4497s is a truly excellent example. I also own a Gustard X26III, and I can't say the E50II is inferior.

Same here. Powered by a supposedly stable gizmo. (!) I d like to know, if you could help me: how to put it in non pre amp mode. And how to display always sampling rate. I don t see menu option in app or remote control.

 

[Pulkass]

@Pulkass I doubt there's an off-the-shelf cable that matches your requirements.
I suggest you make your own - get a USB-C cable, cut one end off to expose the 5V +ve wire and GND wire, then buy a 2-pin circular plug -
https://au.rs-online.com/web/p/industrial-circular-connectors/1115754
and solder together.

I did it. Will send pic of the cable. Thanks.

 

[ziggurcat]

Same here. Powered by a supposedly stable gizmo. (!) I d like to know, if you could help me: how to put it in non pre amp mode. And how to display always sampling rate. I don t see menu option in app or remote control.

It's all in the manual.

 

[Pulkass]

It's all in the manual.

Thanks

 

[Pulkass]

It's all in the manual.

Yes. But l get 'E 4 error'. It s not in the manual.

 

[ziggurcat]

Yes. But l get 'E 4 error'. It s not in the manual.

Page 15

https://dl.topping.audio/um/E50_II_V1.1_EN.pdf

Page 11 & 12 tells you how to enter the menu.

 

[alebucc91]

Hi everyone, I have insensitive speakers (82 dB at about 1 meter) and an EQ headroom of about 7 dB. I was thinking of purchasing the E50 II and setting it to 23 dBu in balanced output, to get a little more power with those tracks that were mastered before the loudness war. I'd like to know if I might be having problems with the input of my Topping PA5 amplifier. It currently works with the Topping E1x2 sound card, which has a much weaker rated output than the E50 II. Thanks