Topping DX9 Discrete question

[BeeKay]

Hi forum,
Checking my options for replacing my A70 pro and D70 SABRE combo with a DX9 Discrete.
Getting PEQ and DSP would help to quit Roon and Tidal (I am paying for Apple Music anyway). I suppose with the Pre All setting (SE and Balanced out simultaneously) I can keep doing what’s happening now: active sub at SE, plus XLR attached power amps.
Question is can I have a PEQ/DSP driven x-over now in the DX9, separating sub and power amps?

Thanks for your ideas and insight.

 

[staticV3]

Question is can I have a PEQ/DSP driven x-over now in the DX9, separating sub and power amps?

No. The DX9 is a stereo device, only two distinct audio signals can be put out.

 

[BeeKay]

Thanks.
So there is only one DSP configuration that will change XLR and SE out in the same way, correct?

 

[marin.weigel]

Thanks.
So there is only one DSP configuration that will change XLR and SE out in the same way, correct?

correct

 

[WeekendWarrior]

Like the OP, I had hoped to be able to implement a sub/main crossover with the DX9 Discrete and thought this might be possible when Topping said that all its outputs "support independent PEQ configuration". Alas when I asked them they confirmed this wasn't possible, as is pointed out by the other replies.

They did say however that they would seriously consider adding this functionality in future products. I believe the Luxsin DAC/amp, amongst others, reviewed recently on here has this functionality.

 

[BeeKay]

Thanks a bunch, guys!
I really had hoped this would have been possible. As, from a vendor‘s perspective it could have been almost a very attractive no-brainer.

And @TOPPING - this and a feature to switch 12V trigger output to „Off“ when in HPA mode (sending downstream amps or active LS to sleep) would be very welcome.