Either way, the mqa 352k cannot be playing
Either way, the mqa 352k cannot be playing
It can. Played MQA 352k yesterday. Streamed some tracks from Qobuz using roon.Either way, the mqa 352k cannot be playing
Yes, I use PC. Sorry, I didn't read previous posts.Did you use the computer? I asked the topping because the playback problem was in the uapp,tidal app on my phone, but there was no answer.
When using the tidal official application, it appears as ofs, and only the uapps are mqa full-decoding, but in this case the bit rate is not fixed. There is no such problem with d90 or e50.
Read the preceding articles.It can. Played MQA 352k yesterday. Streamed some tracks from Qobuz using roon.
Couple of clicks before it started but it does the job.
But actually, I'm not quite sure if I liked the sound of it. I could hear the track second before it was converted to full mqa...
My tone was a little rough.Yes, I use PC. Sorry, I didn't read previous posts.
full paid.UAPP does not work properly without additional paid options installed.
No, pitch was normal.My tone was a little rough.
I'm sorry. bro.
Is there any symptom that the speed of the song increases when playing 352k? When some Korean users played mqa 352k, the speed of the song increased and the pitch increased.
The first video.dx5 1.40도 uapp 강강술레는 여전하네.. - 헤드폰 마이너 갤러리
uapp만 이러는건 맞긴 한데 그렇다고 다른 타이달이나 하이비나 음정 박자 빨라지는걸 잡은 것도 아니고.. 352에서만 음정 박자 빨라지는거는 펌업으로 고칠 수 있다고 하드만 빨리 고쳐줬으면 좋겠다. uapp야 내가m.dcinside.com
dx5 영상 2 - 헤드폰 마이너 갤러리
영상 사이즈가 50메가를 넘어서 하나 다시 찍느라 늦음 ㅈㅅ 패스스루 킴 기기에서 따닥 거리는 소리가 들리면서 44.1 352 와리가리 탐;;m.dcinside.com
Video of mqa not playing properly in uapp
Dear me, don’t you think about ventilation for your system? Theres a very good reason most components require a little air around them, it helps them work more perfectlyI wish the toppings would work more perfectly.
Because I bought all the products that came out after 2016. The most impressive device in particular was the DX3 Pro V1.
At that time, I used Grace-designed devices, which the DX3 replaced.
I build only one system on one desktop I have. Most are mounted on racks or desks.Dear me, don’t you think about ventilation for your system? Theres a very good reason most components require a little air around them, it helps them work more perfectly
Turn off mqa passtrough or down the streaming quality to hifi and it will work normally.The first video.
It happens to me as well but in the end it stays at MQA and it sounds completely different after full conversion to MQA.
Streamed from Qobuz on roon and audirvana. All the same.
Here's my case:Why is that?
The DX5 can be set as a DAC only indeed.Hello guys
sorry if some of my question's might sound silly but I wish to be certain before purchasing the Topping DX5.
can I use this solely as a DAC between my bluesound NODE 2i ? I will go out with optical from the Bluesound the into the Topping DX5 , then back into my amp audiolab 8300 , is that okay and working ?will I hear a good increase in quality using an external DAC ? will it process MQA with no issues in this way ?
same goes for my CD player Denon DCD 600 , can I use the Topping solely as a DAC ? out from the digital output of Denon , then into the Topping , then into my Audiolab 8300
thanks in advance for your feedback
Kind Regards
Hi if you can, try the SMSL M500 MKII and the Sabaj A20 they are more user friendly and have a better DAC chip (don’t think it really matters that much) I've tried both DX5 and SMSL and kept M500 MKII. Subjectively I only liked DX5 in valve sound mode and to me that way was like standard M500 sound. The really main reason for not going with DX5 was not to have access to all the options without disconnect it from power and the firmware updates problems reported (even if my sample did note stall, it would sometimes say it was updating even if not connected through USB)Hello guys
sorry if some of my question's might sound silly but I wish to be certain before purchasing the Topping DX5.
can I use this solely as a DAC between my bluesound NODE 2i ? I will go out with optical from the Bluesound the into the Topping DX5 , then back into my amp audiolab 8300 , is that okay and working ?will I hear a good increase in quality using an external DAC ? will it process MQA with no issues in this way ?
same goes for my CD player Denon DCD 600 , can I use the Topping solely as a DAC ? out from the digital output of Denon , then into the Topping , then into my Audiolab 8300
thanks in advance for your feedback
Kind Regards