To EQ Or Not To EQ, that’s the question.

[Patrick1958]

Great How can I best reduce bass a bit?

Lower the first band (45) in steps by 0.5 until it satisfy you.

 

[TheSacredSoul]

Any recommended Parametric EQ settings for DT1990? Tried both Oratory's and AutoEQ but wasn't really satisfied.

 

[Blujackaal]

Really love how with a 6db 125Hz low shelf, The ER4SR/ER3SE they hit as hard as any multi BA headphone i tried.

 

[solderdude]

Any recommended Parametric EQ settings for DT1990? Tried both Oratory's and AutoEQ but wasn't really satisfied.

Just EQ the treble peak. That should be enough.

 

[TheSacredSoul]

Just EQ the treble peak. That should be enough.

Currently at -10dB at 8333Hz with a Q of 5. Is that right?

 

[solderdude]

That would be about right.

 

[Guetta]

How can I load orator1990 DT 990 preset into foobar? Thanks

 

[TungstenC]

How can I load orator1990 DT 990 preset into foobar? Thanks

For Foobar there's Mathaudio plug-in, https://www.foobar2000.org/components/view/foo_headphone_eq

https://mathaudio.com/headphone-eq.htm

 

[zag55]

Ciao come posso equalizzare il mio Sennheiser Momentum con jriver? Quali valori devo inserire?

 

[solderdude]

Perhaps ask your questions in English. Google translate helps.

Hi how can I equalize my Sennheiser Momentum with jriver? What values should I enter?

 

[Veri]

Ciao come posso equalizzare il mio Sennheiser Momentum con jriver? Quali valori devo inserire?

First, you need to understand EQ in the first place
https://wiki.jriver.com/index.php/Parametric_Equalizer

 

[Guetta]

For Foobar there's Mathaudio plug-in, https://www.foobar2000.org/components/view/foo_headphone_eq

https://mathaudio.com/headphone-eq.htm

 

[zag55]

more precisely i wanted to know if they have already made measurements of the frequency response of these headphones

 

[TungstenC]

View attachment 80731

You'll have to download the plugin form Mathaudio's website in the link bellow. It's just that they don't have it on Foobar's website.

 

[solderdude]

more precisely i wanted to know if they have already made measurements of the frequency response of these headphones

There are different 'momentum's' so you would have to specify which one and even the year of production.

And who are 'they' and to what target was the headphone measured using what equipment ?

 

[Guetta]

You'll have to download the plugin form Mathaudio's website in the link bellow. It's just that they don't have it on Foobar's website.

Thanks, I installed it. Which values do I need to enter into EQ? Values from orator's PDF? I have DT990 250ohm

 

[zag55]

[QUOTE = "solderdude, post: 501159, member: 2693"] Ci sono diversi "momentum", quindi dovresti specificare quale e anche l'anno di produzione.

E chi sono "loro" e con quale target sono state misurate le cuffie utilizzando quale attrezzatura? [/ QUOTE]
Sennheiser Momentum On-ear 2013.Per "loro" intendo qualche sito specializzato in cuffie!

 

[solderdude]

https://www.rtings.com/headphones/reviews/sennheiser/momentum-2-0-on-ear-hd1-on-ear

Maybe this one comes close ? 2013 is an older model and thought it had some changes going to the 2.0 version in the review above.

The review below looks like its from an older momentum OE (2013).
http://personalaudio.ru/detail/Obzor_Sennheiser_Momentum_On-Ear_09072013/
It does not appear to be very different from the current version Rtings measured.

 

[zag55]

ok thank you!

 

[TungstenC]

Thanks, I installed it. Which values do I need to enter into EQ? Values from orator's PDF? I have DT990 250ohm

The Filter Number, Filter type, frequency, gain, and Q(width) correspondingly to the table on the EQ pdf.