additional dayton bass shakers to be fitted on the ( seat backs )
once finished be total 18 bass shakers
floor bass shakers
seat bucket bass shakers
seat back bass shakers
additional behringer DCX 2496 willl have to be fitted into the rack to control the six zone bass shaker outputs channels
1 and 2 for the floor bass shakers
3 and 4 for the seat bucket bass shakers
5 and 6 for the seat back bass shakers
PEQ 9 bands per each channel 1 2 3 4 5 6 , for trimming bass frequencies for smoothness , audio limiters will be set to On on all six output channels to prevent overload to the amplifiers
variable phase and polarity + and - / time delay for each channel outputs
quad four channel amplifiers will be required , x5 behringer EPQ 304 , at 1U frame , five will just about fit into the amplifier rack
EPQ 304 floor bass shakers channels 1 , 2 , 3 ( for front row floor ) channel 4 back row floor bass shakers
EPQ 304 back row , floor bass shakers channels 1 and 2 ( seat bucket front row channels 3 and 4 )
EPQ 304 back row seat buckets channels 1 , 2 and 3 ( channel 4 seat back front row )
EPQ 304 front row seat backs channels 1 and 2 ( channels 3 and 4 seat back back row
EPQ 304 seat back back row channel 1 , ( additional spare channels 2 3 and 4 )