then it has arrived analog device adum 4165/4166

[doitttt]

then it has arrived analog device adum 4165/4166
analog device adum was before of low usbspeed 12mb only play at 96khz
analog device adum 4165/4166 is now upgraded to high speed 480mb on usb 2
this little ic can take out all galvanic isolators
as it is based on optocouplers light
so free all snakeoil

https://www.analog.com/en/products/adum4166.html#product-overview

 

[boXem]

TI's ISOUSB211 in the pipeline too.

https://www.ti.com/product/ISOUSB211

 

[Superdad]

then it has arrived analog device adum 4165/4166
analog device adum was before of low usbspeed 12mb only play at 96khz
analog device adum 4165/4166 is now upgraded to high speed 480mb on usb 2
this little ic can take out all galvanic isolators
as it is based on optocouplers light
so free all snakeoil

https://www.analog.com/en/products/adum4166.html#product-overview

No, the ADuM4165/4166 is not base on opto-isolators at all. Their iCoupler technology is just high bandwidth on-chip transformers and CMOS circuitry. Developed nearly 20 years ago.
The sad part is that that the ADuM4165/4166 enumerates as another USB hub in the chain (and thus also requires a clock). Cramming everything into the one part is convenient, but the USB signal-integrity coming out of it is not as good as it could be. The TI ISOUSB211 paired with a good hub chip would likely yield much better results. But a complete move away from hub-chip based USB "regeneration" will be better in the end.