JeremyFife
Major Contributor
This appears to be a cable. Fine 
Exactly. A well shielded coax cable is cheap but, if you are going to fix it yourself, then buying real 75 Ohm RCA connectors won't be super cheap anymore. In fact, I am in that situation. I have the cable and have provisionally soldered some crap RCA so the subwoofer cable works. But damn I still want to have 75 Ohm end to end.I have plenty of Supra but I'm in Europe. No need to buy their most expensive stuff, it's mostly that the quality is high and the color is better than the usual black.
When it comes to coaxial cable for instance their cable should be 75ohm from one end to the other, for lots of brands this is only true on the cable part but not the connectors, which messes up the sum.
A lot of 4k/120hz HDMI cables have quality issues, but as soon as I replaced with a Supra (again, not the most expensive stuff) it's been working no problemo.
There's nothing magical with the cables or anything, it's just above average quality. I like the copper is covered with tin, prevents oxidation
I have two, both work fine (I even bought them used. 1 meter and 2 meter)
Or to make it more palatable for ASR, remove what can cause irritation:As it happens Supra cables are well regarded here in the UK, for example their USB 2.0 two meter cable was given a 5 star review from 'What Hi Fi?' (Cable of the Year, no less). The pitch seems to be well-made robust products, no flummery just quality components allowing for reliable quality data transmission. All twadddle of course. Neverthelss, Supra manage to present themselves as the audio enthusiast's ally.
This results in a dynamic, rich, and detailed audio experience, free of dropouts or distortions."They do. From their website description:
"Unrivaled Performance and Design
Say goodbye to the traditional limitations of USB cables. The Supra USB 2.0 Cable provides data transmission distances of up to 15 meters without any signal degradation. Its precision-engineered construction features individually shielded and twisted pairs with an exact impedance alignment of 90 ohms—critical for jitter-free transmissions. This results in a dynamic, rich, and detailed audio experience, free of dropouts or distortions."
It's light blue, so far none have turned yellowish. No strange smells either.Though I like the looks of white/grey cables I really prefer black after all.
Most white ones I have (including more expensive ones) became slightly yellowish over time and then they don't look that good anymore. Especially if other parts remain in the original white/grey. Of course depends on the plastics used and how the cable is exposed to light and/or UV.
Besides that, I always check the smell of a new cable. If it smells strongly then I return it immediately.
You don't want to have this outgassing staff in your living room.
Why would a speaker cable have a shield?I started with Supra speaker cables. Reasonably priced and sturdy. Then bought the Supra coax and Cat8 cables as well, just for color matching. Considered their power cables, but these are too expensive for aesthetic reasons only. Question, did anyone try to connect the shield of their speaker cable to the amplifier ground connection? Or is that totally useless?
With that price it's totally okayI went with the first distributor that I found. Good to see even lower pricing.
Oh yeah, a farting butler is unbearable...You don't want to have this outgassing staff in your living room.
These Supra cables aren’t even stiff. Quite flexible actuallyNot only they don't have any measurable advantages, not to talk about audible ones, such stiff/thick cables are often a cause of mechanically damaged plugs/interfaces, I learned that the hard way in the late 80s with audiophool RCA cables in my young naivity.
Not only they don't have any measurable advantages, not to talk about audible ones, such stiff/thick cables are often a cause of mechanically damaged plugs/interfaces, I learned that the hard way in the late 80s with audiophool RCA cables in my young naivity.