Suitable stands for Genelec 8341's

[Sparky]

Hi all.

I own a pair of 8341's in white and am looking for a suitable pair of stands to go with them in lounge environment.

I've bought the Genelec 8000-400 stands and they're obviously perfect for them but the stands are just not wife friendly at all!
The base is far too big and they look out of place in my living room so it's plan B.

Either white or black stands will work I think as the contrast in colour would work.

Any thoughts anyone? (I'm in the UK by the way).

 

[Sparky]

I've seen the Kanto 32" stands in white but the base looks extremely narrow and I would be concerned about them toppling over!

https://www.gear4music.com/Recordin...I4pSecy3FUqIdMUkplYMO6_4PalUUjKAaAk2hEALw_wcB

 

[KantoLiving]

Base is 8.9" W x 10.6" D (226 x 269). Top plates come in two sizes - 4.3" W x 7.1" D (109 x 180) and 7.0" x 7.0" (178 x 178).

 

[Sparky]

Base is 8.9" W x 10.6" D (226 x 269). Top plates come in two sizes - 4.3" W x 7.1" D (109 x 180) and 7.0" x 7.0" (178 x 178).

Hi.

They do seem to be suited quite well to the Genelec 8341's. I just wondered if anyone out there had any actual physical use of them on those stands.
I've always had passive tower speakers so the transition from that to monitors sat on stands is quite daunting.

 

[ryan_beastall]

Hi.

They do seem to be suited quite well to the Genelec 8341's. I just wondered if anyone out there had any actual physical use of them on those stands.
I've always had passive tower speakers so the transition from that to monitors sat on stands is quite daunting.

I don't have use with the 8341s however my 8330s are great on them. Not sure how much larger the iso stand is with the ones but I have plenty of room spare with the 8330s. Currently on carpet with spikes and they have been amazing very well built and great to have the cables routed in the stands especially with all of the cables using both analogue and digital and glm network. Hope this helps.