• Welcome to ASR. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!

Stereonet Australia (Melbourne) Audio Show 2026

Keith_W

Master Contributor
Joined
Jun 26, 2016
Messages
6,884
Likes
18,407
Location
Melbourne, Australia
This show will be on next weekend. The organizers have written up a preview of the show here. Going through the list, it looks like it might be a bit of a disappointing year without very much to look forward to. I hope to be pleasantly surprised though. In any case, I go to meet people, kick some tyres, exchange gossip, and have a good laugh.

Anyway, here might be some rooms to look forward to:
- March Audio makes a return this year. I don't know what's new with him, the last time I saw Alan he had a new speaker with the Purifi tweeter. I didn't think much of it, I preferred the older speaker with the SB Acoustics tweeter.
- Alsyvox was my favourite speaker last year despite its eye watering price. Over the past year, I have been able to hear it a couple of times. For some reason, it sounded much better at the show than at the showroom. The biggest difference was in the bass. That's easily explained away by the small size of the rooms at the show, compared to the absolutely voluminous showroom.
- KEF and JBL will be there, but they are always disappointing. They never bring anything interesting along. How about some Blades? And JBL, how about bringing an M2 instead of bookshelf speakers and Bluetooth speakers? I suspect KEF will be showing their new bookshelf speaker designed by Lovegrove.
- SGR Audio finally makes a return to the show. Most ASR members have never heard of them. Trust me, they are right up there with the best that Australian speaker manufacturers can produce. I mean, they are the Australian dealers for Klippel, and they have been making and selling active speakers since before it was fashionable.
- YG Acoustics is another fantastic speaker that I really rate. I haven't seen any spinorama's of the YG's, but I have my own in-room measurements of a friend's system that utterly blew me away. There are still some things I don't know how to measure, like the sheer attack of these things. They come at you with a really aggressive and dynamic sound which is quite exciting to listen to. KEF Blades may have the same flat frequency response, but somehow they sound more polite and laid back. It will be somewhere in the measurements, I just don't know where.

Also notable are some exhibitors who seem to be missing:

- Hulgich Audio is an Adelaide-based speaker manufacturer. The owner and designer has shown me many measurements of his speakers. These speakers are the complete package, they measure great, the woodwork is stunning, and they sound fantastic. And they are also very reasonably priced.
- Pitt and Giblin have been making some noise on ASR. Looks like they'll miss the show ... again.
- DEQX. For the first time for as long as I can remember, they aren't listed this year. Not a good sign.
- VAF. Another Adelaide based speaker manufacturer, under a new designer for the past couple of years. They have been refreshing all their designs. They aren't quite as nicely built as their rivals from the same city (Hulgich) but they are cheaper, they aren't a one man show, and sound just as good.

Previous show reports here: 2019, 2023, 2025.

If any ASR members plan to attend, we should meet up. If you are from interstate, you are welcome to pop over to my place. I am in Camberwell, not too far from the train station and No. 75 tram line.
 
Last edited:
The show is still going on, and tomorrow (Sunday) is the last day. My pessimism for the show was NOT justified, in fact there were a few new and interesting things there and I had some great conversations with some people. So here we go.

1792244708140.png
1792244990386.png
1792245495023.png


JBL had two rooms at the show. In one room were the "Summit" series - pictured here is the K2 (AUD$169,000) and the small bookshelf speakers were the Ama (but don't quote me on that). This room was driven by Mark Levinson amplification. The other room had 4369 speakers (A$45k I think?) driven by Melody valve amplifiers (pic on the right). Melody is designed here in Melbourne but manufactured in China, and as you can tell - they specialize in valve amps. This monster monoblock was A$100k per pair and uses a 1610 valve (that's twice the size of an 845 valve) in SET configuration.

Neither room impressed me at first. The room with the K2/Mark Levinsons was noisy and they were playing the speakers way too loud with a selection of awful music. It sounded like a wall of sound with no finesse whatsoever. The second room with the 4369/Melody had a much lower noise floor, but they were also too loud, this time overdriving their amps, and I was convinced they were clipping. My friend convinced me to go back and listen, so I went early today before the crowds arrived. I turned the volume down and played my music. NOW I know what the fuss is about. They were free of any audible flaws, not even the boomy bass that plagued many other rooms. The soundstage was really wide and deep. Wow!

I haven't had a good listen to the 4369/Melody system. The problem was that turntable. I hate the sound of vinyl, to me it sounds filthy and compressed. And it's hard to know if tonal problems belong to the source, the speaker, or the room.

Anecdote: someone put an LP on and sat down to listen. I heard the voice sounding like Alvin and the Chipmunks and I wondered how long it would take them to realize the speed was wrong. You would think an audiophile would pick that up immediately.
 
1792245855594.png
1792245880360.png
1792245914471.png


Sound Gallery are a Sydney-based dealer and they brought along some nice high end speakers. From L-R, Wilson Alexx V (A$249k) with Gryphon amplifiers, Marten Coltrane Quintet (A$320k), and Franco Serblin Accordo Unica (A$79k). They also brought along Linn Akurate and Devialet speakers (not pictured, and I didn't get to hear them). All 5 systems were set up in a giant listening room, and they rotated between demonstrations. So what you got to hear depended on what time you walked in.

The Wilsons sound like what you expect a Wilson to sound like. Big, dynamic, powerful, and punchy. I know about their measured problems but honestly they sounded great in the show.

The Martens and Serblins didn't leave too much of an impression, I have already forgotten what they sounded like. Feedback from other showgoers was quite positive so I will go back tomorrow for another listen.
 
1792246617625.png


Now on to a brand I have never heard of - 1 Sound (website here). You walk in and see the humble appearance of these speakers. Painted stamped metal chassis and ruggedized for outdoor use. Many people listened with their eyes and the room was consistently empty yesterday. But I was blown away by these things. Those weird white towers are line arrays, active, and with DSP. You can stack them and make yourself a tall array. They hit you with real impact with a certain physicality to the sound. Clean, loud, free of any smear, neutral, and very impressive. I told many people about them and today the listening room was pretty packed.

The demonstrator was a pro audio guy who really knew his stuff. He specializes in pro installs, e.g. auditoriums, lecture halls, sound reinforcement, cinemas, and high end home theatre. I asked him about why anybody would want cardioid bass in a listening room. He said that the benefits are for outdoor installations and large venues. You need space around the subwoofer to obtain the cardioid effect, if they are placed too close to the walls they function as normal subwoofers - so you may as well buy normal subwoofers. The benefits are: more predictable coverage, less undesirable sound leakage (so you don't bother neighbours), and it excites fewer room modes.

It was a real pleasure to speak to someone who was actually technically competent. Good on them.

The downside is the price. I need to confirm what I heard, I am in a bit of a post-show daze and my memory is faulty. But I believe that the tower system in white cost A$79k for a stereo pair. I think of them as similar to Genelecs. All function and minimum consideration for aesthetics.
 
1792247560607.png


SGR made a return to the show after many years. These are the only 100% Australian made speaker, using drivers designed and built here in Melbourne. They are fully active, using an analog crossover and Class A/B amplifiers designed and manufactured by SGR themselves. These bookshelf speakers, the CX3B, retail for A$35k or thereabouts. I know the owner/designer (Stuart) pretty well. Although they are the Australian distributors for Klippel they don't own a Klippel themselves. They take their measurements the painstaking way - speakers elevated on forklift in their factory, and hours of measurements. Although I have not seen their measurements, Stuart tells me they are +/- 0.5dB from about 40-50Hz up to 20kHz. I have no reason to doubt him, this guy is pretty no-nonsense.

I am also familiar with these speakers, having heard them many times at other shows, in homes, and in their showroom. They are neutral and free from any audible flaws. But at the show, I thought that the top end was rolled off. Stuart told me that he dialled in a small bass boost because he thought that showgoers would like a bit more bass. So I had a listen with/without the bass boost. That little bass boost had tilted the frequency response and caused the treble to sound rolled off. I was told that without the bass boost, the response was straight and flat at the listening position. I said "surely that would sound really thin and bright!", but that's not what they sounded like. They actually sounded neutral.
 
1792248560856.png


You guys will get a kick out of this one - Silent Pound (website). I have never heard of them. These are passive dipoles, but if you look at the back of the speaker:

1792248719609.png


You have to wonder how they achieve that dipole effect. The speaker has holes on the side, so I thought they may be some kind of passive cardioid like the @SigbergAudio Manta. But no, they had this poster on the wall:

1792248843375.png


Take a closer look at the directivity plot:

1792248983856.png


Cardioid above 200Hz, and dipole down to 20Hz and a very impressive directivity plot! I honestly can't work out how they achieved that. How do you make a dipole with no visible rear drivers? Maybe that panel is actually a speaker grille? It's all a mystery, I have to go back tomorrow and take a closer look at this speaker.

As for how they sound ... well that was unfortunate. This was one of the many rooms plagued by bass problems so all I heard was boomy bass. The rest of it sounded pretty neutral though. The speakers are distributed by Selby Acoustics - probably the Melbourne equivalent of @Purité Audio. These guys are all objectivists, some of them have degrees in acoustics, they won't sell you high end cables because they have none in stock, and they are the only dealer who will do an install with a microphone to help them. If you go there, speak to David. He's the young guy who does their acoustic and DSP installs and room sims. Sadly, because he is so talented, he is always busy.

EDIT I went back for a closer look and had a chat to the demonstrator. That "panel" at the back is actually a cloth grille. It's a 3 way speaker. The tweeter/mid is a coaxial, and there are two woofers mounted front-to-back, firing OUT-of-phase. The vents at the side help cancel the side lobes. He said that the out-of-phase woofers mean that the first SBIR frequency is a peak and not a null, which should help with DSP equalisation. Not that there was any DSP at the show, they didn't have time to set it up. Which may explain the boomy bass that I heard. I specifically put on some bass-shy music, and the top end is wonderfully clean and linear.

@amirm or @hardisj should get a pair in for review, I reckon they would be impressed.
 
Last edited:
View attachment 564865

SGR made a return to the show after many years. These are the only 100% Australian made speaker, using drivers designed and built here in Melbourne. They are fully active, using an analog crossover and Class A/B amplifiers designed and manufactured by SGR themselves. These bookshelf speakers, the CX3B, retail for A$35k or thereabouts. I know the owner/designer (Stuart) pretty well. Although they are the Australian distributors for Klippel they don't own a Klippel themselves. They take their measurements the painstaking way - speakers elevated on forklift in their factory, and hours of measurements. Although I have not seen their measurements, Stuart tells me they are +/- 0.5dB from about 40-50Hz up to 20kHz. I have no reason to doubt him, this guy is pretty no-nonsense.

I am also familiar with these speakers, having heard them many times at other shows, in homes, and in their showroom. They are neutral and free from any audible flaws. But at the show, I thought that the top end was rolled off. Stuart told me that he dialled in a small bass boost because he thought that showgoers would like a bit more bass. So I had a listen with/without the bass boost. That little bass boost had tilted the frequency response and caused the treble to sound rolled off. I was told that without the bass boost, the response was straight and flat at the listening position. I said "surely that would sound really thin and bright!", but that's not what they sounded like. They actually sounded neutral.

Interesting, I find this so content dependent, but for some stereo content I listen to straight up FLAT bass from about 200Hz down. All of my HT listening is with FLAT bass. Of course the speakers and the room is going to be a factor. But for quite a while, I've ignored comments that FLAT bass cannot sound good (at least in some instances).

My FLAT Dirac Live profile.
1792288542117.png


My main BASS BOOST Dirac Live profile.
1792288486350.png
 
Thank you for sharing your visit Keith.
Silent Pound is a very interesting brand, very creative and also a bit secretive so it’s hard to get details on the Bloom.
Did you see their Challenger model too? As the polar map you shared seems to be for this model.
But the one for the Bloom on their website is very close.

So woofers in V-frame for the Bloom, the response is typical of any dipole down to 20hz with side cancellations :
iu


But I still can’t figure out how exactly they placed the cardioid coaxial mid/horn.
If it’s on top then the placement of the side holes wouldn’t match.
Or this V schematic is just to illustrate the concept and maybe the mid is placed in the middle of both woofers, that would still put it still a bit far for of the lower side holes.
Maybe they have some kind of tunnel from the mid enclosure to the side holes, to delay the soudwaves.
Anyway very cool driver, super compact.

Did you see their last model? Not on the website yet : https://www.hifipig.com/silent-pound-parallax-loudspeakers-hifi-pig-exclusive/
 
Thank you for sharing your visit Keith.
Silent Pound is a very interesting brand, very creative and also a bit secretive so it’s hard to get details on the Bloom.

Thank you for sharing additional details. I have a lot of photos to get through, and my brain is still a bit fried from the weekend. That woofer configuration is interesting, I have never seen anything like that before. I did not see any other speakers from this company, this was the only speaker that was available.
 
Was DEQX there?

They were. It was much smaller for them this year, they partnered with Krix which meant that they could only demonstrate in between Krix's home theatre sessions. I didn't take any photos of their room. They used the Krix Esoterix Altrum (picture below) with a subwoofer to demonstrate their DSP. Unfortunately they had network issues so things didn't go too smoothly for them.

1792322254402.png


What's new: a DSP enabled amplifier with subwoofer output, selling for A$13k. And their software is finally out of beta.

Kim and I had a disagreement about how DSP should be implemented and we had a discussion about it. I have since had the chance to play with the software, and I complained that the way it has been set up, the user has no choice but to take MLP measurements for driver correction. I said that the speaker should be taken outside, and then each driver measured individually to generate individual correction for each driver. He told me that they have some kind of windowing technique that is "as effective" as a quasi-anechoic individual driver measurement. I am not convinced. If you take an MLP measurement, you could smooth the heck out of it and use that. But that's more a general tone control than a driver correction.

The other thing I found out was that the software uses PEQ's to correct the response. It's not a linear phase inversion. What IS linear phase are the crossovers. So the end result is mixed phase, not linear phase. Nothing wrong with mixed phase, it can be made to work well if you are careful about identifying minimum-phase regions (which is what we should be doing anyway). But if it is mixed phase then it should be advertised as such. I could not see any way I could correct excess phase using their software, which is also OK because my feelings towards the benefits of EP correction are also starting to cool off. I used to think it was absolutely necessary, now I am wondering how audible it all is. It certainly makes the measurements look prettier, but as I learn more about psychoacoustic thresholds I start to question how perfect the measurements need to be. Might be a phase I am going through.

... which is a long way of saying that the DEQX isn't as capable as I initially believed a few years ago. But that is also OK because at the same time, my expectations of what DSP needs to do has also gone down. It's like owning an expensive fishing rod and thinking that people with a line and hook can't catch fish. They absolutely can, the only thing the fishing rod gives you is the ability to catch more types of fish. But in the end, it's still fish on your plate and nobody cares if it was caught with a $10,000 fishing rod or with a line.

Anyway the new software should be released by now, which means I will be able to visit my friend, take a look at it, and maybe get some measurements.
 
Anyway, continuing with the show report.

1792324020600.png


Alsyvox Tintoretto (A$170k). I raved about this speaker last year. It's a panel speaker that does not sound like a panel speaker. We usually expect low SPL, small sweet spot due to narrow directivity, and all sorts of room issues due to the complex sound field. Between last year and now, I have had the opportunity to hear them a couple of times in the dealer's showroom which is a much larger space (7m x 11m x 3m) than the bedroom-sized room they were using in the show. They sound far less impressive in a large room, which makes me think that (1) sitting so close to such a big speaker has something to do with it, and (2) it is benefiting tremendously from room gain which is what is filling out the bottom end so nicely. At the moment, these are just suspicions. The dealer is a really nice guy, the kind of friendly and down-to-Earth Aussie you might picture if you think of us. He is still keen for me to visit with my microphone, so I would very much like to go there and see if I can improve on his setup. If I get measurements, I will of course share it on ASR.

Feedback on this room was overwhelmingly positive. Nearly everyone I spoke to thought that it was either the best, or one of the best rooms in the show.
 
Last edited:
1792325797666.png


March Audio was back after missing last year's show. They brought along their Sointuva bookshelf speakers shown above ($8k), and Kuoro (A$10k) floorstanders (not pictured). Besides the obvious difference that one is a floorstander and the other is a bookshelf speaker, the other major difference is that the Sointuva has a SB Acoustics tweeter with integrated waveguide, and the Kuoro has an Purifi tweeter with waveguide.

Both were exceptional speakers, but there was a difference tonality between them. Alan March explained that both were flat on-axis (and I believe him), the difference was that one had slightly wider directivity than the other, so throws more treble sound power into the room, and thus the PIR is less sloped in one than the other. I personally preferred the Sointuva.

Alan has been busy, he has moved from Albany to Gingin. Not quite sure why - Gingin is closer to Perth, but Albany is a slice of heaven. Apart from all the sharks, that is. I mean, check this out:

1792326755387.png
 
1792326896660.png
1792326920214.png


Making waves at the show was a new Australian speaker, made right here in Melbourne - Counterflow 3.15. This is a 3-way open baffle dipole speaker. The driver on top is a coaxial and there are two woofers. Strangely, there is a horn loaded tweeter at the rear and angled slightly upwards. The system is fully active and DSP controlled. If you look at the second picture, the two designers are in the top right corner (a guy with a beard, and a shorter balding guy). I am kicking myself for failing to take a picture of the DSP unit. It looked like furniture, it was so nondescript. I believe they were using Hypex amps with built-in DSP. I was not shown the measurements, but I was shown the equalisation that they dialled into the speaker to get it flat at the listening position.

These speakers were well received, but I had so many questions. Like - if you scallop the baffle like that (see first picture), what effect will that have on diffraction? Why mount a tweeter at the back and why give it a horn (their answer: because the coaxial is not a full dipole and the tweeter is a compression driver).

Anyway, they have been invited to give a presentation at our audio club so i'll learn a bit more about them when they do show up.
 
1792327630320.png


One of the fun aspects of these shows is that you might be wandering around the lobby and suddenly you see God sitting there politely listening to someone ranting about politics. That is Micahil Barabasz, Australia's only driver manufacturer, who has published in the AES and given dozens of presentations. He sadly retired and closed his factory this year. No matter how much I think I know about measurements, there is always someone like Barabasz to keep you humble. He made me feel like a complete novice. I chatted to him for half an hour and I learnt a lot.

For e.g. he said that you can design a driver for flat response, low distortion, or high efficiency (I may be misremembering). But you can only pick two. In his opinion, it is best to design for low distortion and sacrifice flat response, and go for a reasonable efficiency target. I asked "what happens if you equalize it to a flat response?". He said that you still retain the benefits of low distortion.

He has been measuring speakers since before Klippel brought their machine to market, and he had plenty to say about Klippel. He bought one (not the NFS which is for measuring speakers, he bought the driver measurement module) and explained its shortcomings. He said he can do the same measurement manually, but it takes him a day or two, and the Klippel can do it in an hour. But the results are not the same. So I asked him which one he believes. "My measurement, of course". His explanation went way over my head, but in the end he worked with Klippel to improve their modelling.

Besides his contribution to loudspeakers, Barabasz is also known as the guy who helped design the magnetic repulsion mechanism for the Continuum Caliburn turntable, which Fremer (I know, I know) called the "best turntable in the world" at one point.

I asked him what he's doing in retirement. He said "nothing. My garden has been benefiting". So I tried to persuade him to write a book. He wasn't enthusiastic about the idea. Pity. He is really funny in an understated kind of way.
 
Doesn't sound promising for DEQX. But with a fancy box, they can still probably reach the high-end community. Thankfully, we have several other DSP options now.

I listened to Alsyvox in Munich in 2018.
Alsyvox (Stor).jpg


I remember I thought it was like listening to a tiny speaker with no dynamics and bass.
While I'm sure they can perform better and the larger models have better low frequency capability I doubt the Xmax is higher than max 10 dB with their biggest speak but probably lower. And distortion for such a driver inn the lows are likely not very low. If I'm wrong, I would like to proven with measurements.

For midrange and treble they probably perform very well in many aspects, but I don't like where they are crossing. Crossing close to the most sensitive area has always detrimental effects IMO. But they look like a beautiful furniture.

Have heard Silend Pound here in Europe several times. They sound generally very good, but price is IMO too high.

IMG20221028165913 (Medium).jpg

IMG20221028170413 (Medium).jpg
 
Doesn't sound promising for DEQX. But with a fancy box, they can still probably reach the high-end community. Thankfully, we have several other DSP options now.

That is in fact what they said. He told me that some American high end forum (don't know which? I can't find any recent threads in WBF or A'gon) have been swapping their DAC's and MSB's for DEQX after hearing what it can do. He also said that convincing high end customers is a tough sell, they are used to paying >$25k per channel, how can a processor that uses off-the-shelf chips and selling for $16k for 8 channels possibly be any good. If anything, the price might be too low to convince those people. I mischievously suggested that he could add a LPSU module, a clocking module, and an upsampling module and jack up the price by 3x. Kim is a soft spoken gentleman and he chuckled at the idea - so I don't know whether he was chuckling at the absurdity of my idea or politeness.

I listened to Alsyvox in Munich in 2018. I remember I thought it was like listening to a tiny speaker with no dynamics and bass.

I had the same experience when I listened to the Alsyvox in the dealer's showroom. From your picture, the speakers are much further away and the room is much larger. They only come alive when you sit close to them and in a small room. I had a couple of theories why, in my original post.

Whatever it is, i'll find out if I manage to visit him with my microphone.

Have heard Silend Pound here in Europe several times. They sound generally very good, but price is IMO too high.

I think we have established that people like most of us on ASR have a different view of pricing than the high end audio market. We think that products should be reasonably priced. Which would be fine, but that all depends on the business model of the manufacturer. Do you remain low volume and charge a high price per unit? From a business perspective, high price can be a benefit - more margin for the dealer, so they are more motivated to sell. Fewer products to manufacture and ship, so it won't overwhelm your production capacity and QC. And of course, high price itself can be a feature in itself to convince luxury buyers of Veblen goods that they are buying something exclusive that ASR plebs can't afford.
 
That is in fact what they said. He told me that some American high end forum (don't know which? I can't find any recent threads in WBF or A'gon) have been swapping their DAC's and MSB's for DEQX after hearing what it can do. He also said that convincing high end customers is a tough sell, they are used to paying >$25k per channel, how can a processor that uses off-the-shelf chips and selling for $16k for 8 channels possibly be any good. If anything, the price might be too low to convince those people. I mischievously suggested that he could add a LPSU module, a clocking module, and an upsampling module and jack up the price by 3x. Kim is a soft spoken gentleman and he chuckled at the idea - so I don't know whether he was chuckling at the absurdity of my idea or politeness.



I had the same experience when I listened to the Alsyvox in the dealer's showroom. From your picture, the speakers are much further away and the room is much larger. They only come alive when you sit close to them and in a small room. I had a couple of theories why, in my original post.

Whatever it is, i'll find out if I manage to visit him with my microphone.



I think we have established that people like most of us on ASR have a different view of pricing than the high end audio market. We think that products should be reasonably priced. Which would be fine, but that all depends on the business model of the manufacturer. Do you remain low volume and charge a high price per unit? From a business perspective, high price can be a benefit - more margin for the dealer, so they are more motivated to sell. Fewer products to manufacture and ship, so it won't overwhelm your production capacity and QC. And of course, high price itself can be a feature in itself to convince luxury buyers of Veblen goods that they are buying something exclusive that ASR plebs can't afford.
It's one of the reasons why DEQX has increased so much in price vs the previous generation. They have to in order to sell it to the high-end community. It's unfortunate.

Alysvox is an open baffle. With the dipole cancellation it's very difficult to achieve high SPL in the lows. A Norwegian audiophile had sixteen 21" woofers in dipole and people said it still sounded polite. In ar large room, it's so surprise Alsyvox sounds like a small speaker. If they were trully into high-end sound, they would used active crossover and a separate bass solution.

Sure, but there's very low prices and there's a justified price for a speaker. The very high prices we see now for many speakers can't really be justified IMO. Part of the problem is too much cost is going to marketing and shows. We need another model. Sending a speaker to a reviewer (magazine or online based) that require you to make deal with them for $5000 or more is simply ridicolous. That's how many reviewers operate now. I know this from communicating with several of them.
 
Back
Top Bottom