-
Welcome to ASR. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!
spinorama.org
- Thread starter pierre
- Start date
The addition of min/max pricing input fields is very much appreciated.
BoredErica
Addicted to Fun and Learning
Is Kef R3 Meta getting added any time soon from Erin's (https://www.erinsaudiocorner.com/loudspeakers/kef_r3_meta/) review? Thanks
Nice to see that you purchased the Buckeye Amps unit. How is the sound compared to the Topping. Do you notice the extra power on your KEFs?
Arc Acoustics
Member
I hope that I can see the recent measurements by Erin soon, including beloved Revel 126 Be
Last edited:
Arc Acoustics
Member
I did on the FB but I didn't get any response.please petition Erin to send the data to me
I couldn't push too much because I know he is in the tough situation.
At least he started to walk again, and I really hope he's getting happy life again.
OP
- Thread Starter
- #290
I made an update today with
- the latest measurements from ErinsAudioCorner
- changes to the software to speed up the loading of the content (lots of small changes instead of a proper redesign)
Let me know if that breaks on some browsers.
For the IT geeks:
The original idea was to process everything on the browser side and only download static files. Over time the files with the measurement data grew in size and became slow to load. I broke them into pieces and use a service worker to load them asynchronously. LIghthouse is relatively happy. If you want to help to tune the SW and how to do it better, PRs are welcome.
- the latest measurements from ErinsAudioCorner
- changes to the software to speed up the loading of the content (lots of small changes instead of a proper redesign)
Let me know if that breaks on some browsers.
For the IT geeks:
The original idea was to process everything on the browser side and only download static files. Over time the files with the measurement data grew in size and became slow to load. I broke them into pieces and use a service worker to load them asynchronously. LIghthouse is relatively happy. If you want to help to tune the SW and how to do it better, PRs are welcome.
I saw this post claiming that the Edifier MR4 was upgraded: https://www.audiosciencereview.com/...easurements-its-probably-been-upgraded.42941/
Just wanted to let you know, it might be better to update the MR4 EQ, or not.
I would also like to know what's target curve you use for the EQs? Because I extracted the data from the measurements and EQd it to flat target and my MR4s were way brighter than your old and new EQs.
Just wanted to let you know, it might be better to update the MR4 EQ, or not.
I would also like to know what's target curve you use for the EQs? Because I extracted the data from the measurements and EQd it to flat target and my MR4s were way brighter than your old and new EQs.
totti1965
Addicted to Fun and Learning
@pierre : will there be a new update with Erin’s and @amirm ‘s latest measurements - perhaps in June?
With google chrome as browser I have no problem to load the Spinorama.org graphs quickly.
Thank you for your work! Speakers are the weakest and therefore the most important part of the chain!
thorsten
With google chrome as browser I have no problem to load the Spinorama.org graphs quickly.
Thank you for your work! Speakers are the weakest and therefore the most important part of the chain!
thorsten
OP
- Thread Starter
- #293
If you have a fast connection then yes. A lot of people are still on 3G/slow 4G and then it makes a lot of a difference.
Hello all,
I will update the website today. I expect a few things to break that I will try to fix the coming days.
You can have a preview on the dev site: dev.spinorama.org
P.
Last edited:
Ron Texas
Master Contributor
- Joined
- Jun 10, 2018
- Messages
- 6,655
- Likes
- 10,500
404
- Joined
- Feb 27, 2018
- Messages
- 534
- Likes
- 696
If you have the time, please also add the new Morel speakers in https://www.erinsaudiocorner.com/loudspeakers/morel_avyra_633/. Thanks!
I can access the preview site on my end.
Ron Texas
Master Contributor
- Joined
- Jun 10, 2018
- Messages
- 6,655
- Likes
- 10,500
Thanks. For some strange reason Safari on my Mac gets 404, even with AdGuard turned off. I was able to access it using Edge on a Windows machine. Both are set up to use Cloudflare DNS.
@pierre do you have any idea why Safari can't access your dev site?
OP
- Thread Starter
- #297
@Ron Texas
I am guessing I made an error in the link
https://dev.spinorama.org
and not
http://dev.spinorama.org.
P.S.: possibly other errors in my loadbalancer since I changed the config today and I usually dont. I also see some 404s one time over two and that look suspiciously like a miss on 1 of the 2 frontends.
Last edited:
Ron Texas
Master Contributor
- Joined
- Jun 10, 2018
- Messages
- 6,655
- Likes
- 10,500
Thank you. When I typed in the https address I was able to reach the site.
totti1965
Addicted to Fun and Learning
Hallo,
I am able to reach the side.
Nice, that the bug with the equalized frequency response of the KEF Blade 2 Meta is solved now!
The estimated in-room-response looks now natural.
Thank you!
Thorsten
I am able to reach the side.
Nice, that the bug with the equalized frequency response of the KEF Blade 2 Meta is solved now!
The estimated in-room-response looks now natural.
Thank you!
Thorsten
Similar threads
- Locked
