• Welcome to ASR. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!

Speaker Isolation feet,- worth looking at, or nonsense?

Whoops, editing

30 Duro is the softest

Do not want Silicone!

These look right:


 
Last edited:
Whoops, editing

30 Duro is the softest

Do not want Silicone!

These look right:


Just before you buy the sorbothane stuff you might try some household materials like a folded blanket or towel under the speaker....
 
Just before you buy the sorbothane stuff you might try some household materials like a folded blanket or towel under the speaker....
When choosing sorbothane stuff, make sure you have something between that puck and surfaces up and down from it. Sorbothane gets very sticky over time and you will not be able separate them unless there is a separation layer in between.
 
When choosing sorbothane stuff, make sure you have something between that puck and surfaces up and down from it. Sorbothane gets very sticky over time and you will not be able separate them unless there is a separation layer in between.
Yep, found some nasty residue after using just sorbothane bumpers but since I won't use them again, not a problem :)
 
Skip the sorbothane imo. Doesn't last and/or leaves a residue.
 
Skip the sorbothane imo. Doesn't last and/or leaves a residue.
The conclusion I came to. OTOH doesn't mean it might not work for a particular situation with additional help. Most of this vibration control stuff is meh
 
They don't contribute to anything we see in measurements. Although intuitively compelling, the verdict is usually that they make no difference.

Edit: I own and use GAIA feet but not the most expensive kind. I just like the way they look I guess.
Bogus. Unless the speaker itself is so shoddily-constructed that the feet somehow help counteract strong vibrations of the cabinet, but that would have to be very carefully tuned.
Did anyone ask the question, do you use a turntable?
If you do and play music at realistic levels, then proper feet or an isolation platform can be quite audible and can easily be measured. In extreme cases it can be critical.
 
Did anyone ask the question, do you use a turntable?
If you do and play music at realistic levels, then proper feet or an isolation platform can be quite audible and can easily be measured. In extreme cases it can be critical.
I did try and improve my already good Technics SL1200mk2 footers by adding sorbothane footers but they just made it a lot worse. OTOH there really was no good solution to the wall mount used at the time, it was just inappropriate for the task. On any other surface the stock suspension/footers are awesome.
 
My only interest is for when using subs as stands, stop the ones on top from skittering. I don't think cloth...

Discs cut from a sheet of thin neoprene maybe?
 
I did try and improve my already good Technics SL1200mk2 footers by adding sorbothane footers but they just made it a lot worse. OTOH there really was no good solution to the wall mount used at the time, it was just inappropriate for the task. On any other surface the stock suspension/footers are awesome.
Years ago I had to isolate my speakers by placing them on slabs of foam to prevent LF feedback and other audible effects coming through the turntable. Technics tables made for DJ use are likely not terrible susceptible to this type of thing.
 
My only interest is for when using subs as stands, stop the ones on top from skittering. I don't think cloth...

Discs cut from a sheet of thin neoprene maybe?
Try a sheet of low shore silicone. It won't degrade like sorbothane and will give you great isolation.
 
My only interest is for when using subs as stands, stop the ones on top from skittering. I don't think cloth...

Discs cut from a sheet of thin neoprene maybe?
You put a tt on top of a sub? If a dual-opposed design maybe, but I still wouldn't.....
 
Years ago I had to isolate my speakers by placing them on slabs of foam to prevent LF feedback and other audible effects coming through the turntable. Technics tables made for DJ use are likely not terrible susceptible to this type of thing.
I was more speaking to tt isolation, which might have some value. Speakers, meh
 
Possibly slightly off topic, but connected to the issue of loudspeaker cabinet vibrations or their absence. Its often assumed that placing plant pots etc on top of speakers degrades the sound. I have never been able to discern any difference, but I’ve never done a blinded comparison and don’t see how one could (shut you eyes while assistant shuffles plants around?)
The ability to act as glorified plant stands has secured the acquiescence of my partner to the presence of a lot more loudspeakers than I’d otherwise get away with.
 
Back
Top Bottom