Since you have two you're in an ideal position to send one in for testing, so start a conversation and ask directly. Things have been retested from time to time, but usually when there's a specific issue that's come up and needs to be addressed, so a detailed explanation of why you think a rerun is necessary would probably help.Is there any chance of re-running the measurements on a commercial sample? I own 2 SGD1 and I'm honestly disillusioned now, both by ASR and by Soncoz.
hopefully new measurements for laqxd1as wellI'm in Europe and I have the 2 DACs in two separate countries, both being used daily, without any alternatives. I hope there is a member in the US who can send one to Amir, just for a simple SINAD measurement.
You guys just need to contact Amir through PM explain the situation and provide the device to remeasure. Amir himself is of course not responsible for any variation in the production.well i googled what sbam is. found the forum. then found this thread.
https://www.superbestaudiofriends.o...coz-sgd1-asr-measurement-discrepancies.11115/
i love asr obviously. and trust amir.
But thereis too much gossip going on right now, that i think it has to be addressed.
Did Amir get a cherry picked sgd1 or laqxd1? or did the hump fix mess with the sinad performance?
according to that thread these are serious allegations.
i do hope that some great guy like amir can redo some measurements from a donated soncoz perhaps (not the one sent by ben), to see what is going on.
Because from all that i am reading right now, i am starting to doubt the dac i have.
and that is bad.
thank you
Noone here accused amir of anything. We trust his measurements thats why we visit this forum. In my case, i am in europe so sending it over is a no go due to customs especially with the new changes...You guys just need to contact Amir through PM explain the situation and provide the device to remeasure. Amir himself is of course not responsible for any variation in the production.
So do what I suggested and see what happens.
Send one over to be tested then.I am said I am disillusioned that he didn't test a production version, I didn't accuse him of anything.
Already rejected as impractical - wrong continent.Send one over to be tested then.
OK, I just found out about this issue with someone calling me a crook and in bed with Soncoz to give them a good review. You all should start a conversation with me so I can look into these things. I can't read all the threads here.Is there any chance of re-running the measurements on a commercial sample? I own 2 SGD1 and I'm honestly disillusioned now, both by ASR and by Soncoz.
@amirm , my SGD1 is collecting dust with my 789 dead and no replacement amp, so I can send you mine if that would help.OK, I just found out about this issue with someone calling me a crook and in bed with Soncoz to give them a good review. You all should start a conversation with me so I can look into these things. I can't read all the threads here.
I went to buy one on Amazon but there is nothing in stock in US and will take month or more to get a unit to test. Anyone in US has one that can loan it to me to test???
Is that in dispute also???I would appreciate a new test for laqxd1 if possible, as well... You are the best
I think they questioned all sonkoz producta though they only provided measurements for sgd1.Is that in dispute also???