The theory was good ! (at least with my firmware version) Yes this is working as you said, even long press on mute seems to reset or restart the unit.Leave the unit in a mute state (with the illuminated ring around volume knob flashing) for about 10 minutes, after which it goes into standby until reactivated by a further press on the mute button… in theory
If you don't mind me asking, what's the hurry?The question is to have immediate standby
Only @Ben1987 can tell you exactly what happens when the unit drops into standby, but I assure you, there is no significant…What exactly is going to stand-by ?
Press the mute button and everything is ready within seconds. Do not believe the junk you read on the ’net about “warm up”.…warm up time.
I do not care about energy saving option. But i want to turn off or standby to not have any light. I'm listening in my bedroom and want to be able to switch off/stand by from front panel or remote. I do not want to drill an put a front switch for now......If you don't mind me asking, what's the hurry?
Press the mute button and everything is ready within seconds
I'm listening in my bedroom and want to be able to switch off/stand by from front panel or remote.
And ?There is a mute button on the remote control of SGD1.
If you don’t want to wait, you can only press the switch button on the back of the machine.And ?
Mute only mute and goes in standby 10 minutes after... I do not want to wait !
If you don’t want to wait, you can only press the switch button on the back of the machine.
Is that true?I can't tell the difference between the interfaces for the same 192kHz music file.I'll go and hear some more.AES input works for me using pi2AES board on piCore Player up to 192Khz. (Sound seems to be ritcher than normal USB)
I do not care about energy saving option. But i want to turn off or standby to not have any light. I'm listening in my bedroom and want to be able to switch off/stand by from front panel or remote. I do not want to drill an put a front switch for now......
Ten minutes into standby seems like a long time, and I'll consider updating the software.And ?
Mute only mute and goes in standby 10 minutes after... I do not want to wait !
Pie2Aes board is also doing a good job. I have tested BNC and AES with DACs that accept it and all sound better than with PC with spdif on cinch.Is that true?I can't tell the difference between the interfaces for the same 192kHz music file.I'll go and hear some more.
Many thanks, I will wait before dismantling it and put a toggle switch on the front !Ten minutes into standby seems like a long time, and I'll consider updating the software.
I'll see if the problem can be repeated.As you said, it should be a software problem.
Seems that I indeed have an early unit, there is no IMD fix, not even hand-soldered one.
How do you see that there is no IMD fix by opening the unit? The production boards don't need anything fixing, they are a revised design.
I think the only way to test it is to run an actual IMD measurement.
https://www.audiosciencereview.com/...fix-ess-hump-on-sgd1-and-la-qxd1.10502/page-2
By looking at the capacitors as described in the "how to fix" thread.