• WANTED: Happy members who like to discuss audio and other topics related to our interest. Desire to learn and share knowledge of science required. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!

SOLD!!!:NC500 modules x3 and a couple of stock buffer boards and Hypex terminated/unterminated cables:SOLD!!!

C. Cook

Senior Member
Joined
Sep 21, 2021
Messages
362
Likes
184
Hypex NC500 modules x3 (unused), Hypex SMPS3k700 power supply, a few factory buffer boards and several Sparkos voltage regulators (+ and -) and SS2590 long leg 6-pin op-amps x5 for sale.

I've also got a nice (mostly) pre-machined aluminum case with cutouts on the back panel for a 3-channel setup (note that's NOT a scratch on the front, just a weird smudge) as well as *most* of the Hypex cables needed for a build. And finally I've got some 'blank' Hypex buffer boards with empty solder pads and through holes. Please see pictures and HMU with any questions via DM.

It'd be nice to send these all to one person both for convenience to me and ease in completing a build for the buyer. I'm pretty flexible on price but would hope not to *lose* too much money on this project that I decided not to complete myself.

Having never posted a for-sale ad here, this is mainly intended to gauge interest and start the discussion due to the fact that this 'collection' might seem daunting.

Mods, as usual please let me know if I'm not in compliance with rules and I'll do whatever is necessary to comply.
 

Attachments

  • 20211212_152252.jpg
    20211212_152252.jpg
    492.9 KB · Views: 127
  • 20211212_151916.jpg
    20211212_151916.jpg
    309.5 KB · Views: 131
  • 20211212_151905.jpg
    20211212_151905.jpg
    363.9 KB · Views: 124
  • 20211212_151859.jpg
    20211212_151859.jpg
    270 KB · Views: 125
  • 20211212_151855.jpg
    20211212_151855.jpg
    494.3 KB · Views: 141
  • 20211212_152008.jpg
    20211212_152008.jpg
    147.8 KB · Views: 140
  • 20211212_151950.jpg
    20211212_151950.jpg
    126.8 KB · Views: 134
  • 20211212_152056.jpg
    20211212_152056.jpg
    146.6 KB · Views: 143

Madjalapeno

Senior Member
Forum Donor
Joined
Aug 13, 2021
Messages
463
Likes
1,121
Location
NH, USA
Nice collection (not something for me), but could be useful to say a few things:

- where are you? (don't recognize the power receptacle).
- ballpark price?
 
OP
C. Cook

C. Cook

Senior Member
Joined
Sep 21, 2021
Messages
362
Likes
184
Nice collection (not something for me), but could be useful to say a few things:

- where are you? (don't recognize the power receptacle).
- ballpark price?
Thanks. I'm in Houston, but sq's answer to your question was correct. The initial plan was to build a 3 channel nc500 based system hence the large SMPS with 3 outputs and the 20 amp plug. Never got around to even ordering the 20 amp cable though...

As far as price, it's negotiable primarily because I think it's unlikely that anyone will want to buy the whole lot and make their own 3 channel amp, although it is a very nice case that, itself, was over $200. For the overall lot, I'd take $550, though if I'm going to end up having to sell it all individually the combined price would be higher. Ex. for the nc500 modules I think about $140/each is a fair price, but having never sold these and no access to Hypex's bulk pricing (these aren't available via their DIY store), I could be off either up or down???

Just noticed I also forgot to mention the Cardas gold XLR female jacks that I'm also trying to get rid of. I believe there are four (4) of them. http://www.cardas.com/cm_f_xlr.php
 
Last edited:
Top Bottom