nerkx
New Member
- Joined
- Jun 2, 2021
- Messages
- 1
- Likes
- 0
Hi guys my audio understanding is almost 0, I currently have a toppings TP-30 that I use with headphones and small monitors, but now i got some tannoy TF6-F I am not sure i understand what are the cons of using a underpowered amp for these? other than having to pump up a bit the knob
for me is quite convenient having the small topping on the desk that does both dac and amp, not sure what to search for that is decent for speakers as well.
TP30
Suitable Speaker Impedance 4-8Ω
Maximum output power 16.3W
Frequency response 20-20kHz±0.6dB
Input sensitivity 390mVrms
Noise <1mV
Gain(@1kHz) 28dB
And the TF6
Recommended Amplifier Power (Watts RMS) 25 - 150
Continuous Power Handling (Watts Peak RMS) 75
Peak Power Handling (Watts) 300
Sensitivity (2.83 Volts @ 1m) 90 dB
Nominal Impedance (Ohms) 8
Frequency Response (-6dB) 38 Hz - 32 kHz
for me is quite convenient having the small topping on the desk that does both dac and amp, not sure what to search for that is decent for speakers as well.
TP30
Suitable Speaker Impedance 4-8Ω
Maximum output power 16.3W
Frequency response 20-20kHz±0.6dB
Input sensitivity 390mVrms
Noise <1mV
Gain(@1kHz) 28dB
And the TF6
Recommended Amplifier Power (Watts RMS) 25 - 150
Continuous Power Handling (Watts Peak RMS) 75
Peak Power Handling (Watts) 300
Sensitivity (2.83 Volts @ 1m) 90 dB
Nominal Impedance (Ohms) 8
Frequency Response (-6dB) 38 Hz - 32 kHz