Seeking help with Purifi 1ET9040BA DIY build

[Carlton80@0]

I have the eval4 and Eval5 kits and the Hypex SMPS1200A180 power supply. Looking to build four mono blocks for my system. Unfortunately I have go to the DIY route due to the limited availability of 9040 builds that will fit in my 19 inch rack space and budget. Not totally sure of the proper wire configuration to go from J4 on the Eval to J4 or J5 on the 1200. I also picked up the Ghent audio harness listed for eval 1,2,3 6, and 7. Not listed on Ghent site as compatible with EVal 4/5. Hopefully it can still be used with cable rearrangements. Any advice from members with experience will be greatly appreciated.

 

[Kim Nordtorp Madsen]

Hi Carlton
We have made a short note on how to connect EVAL4/5 to a SMPS1200A180 - see here:

https://purifi-audio.com/shop/eval5-eval5-mono-1et9040ba-deluxe-eval-kit-2561/document/796

best regards
Kim

 

[Carlton80@0]

Hi Carlton
We have made a short note on how to connect EVAL4/5 to a SMPS1200A180 - see here:

https://purifi-audio.com/shop/eval5-eval5-mono-1et9040ba-deluxe-eval-kit-2561/document/796

best regards
Kim

Excellent!
Thanks so much for this info to aid in understanding the assembly.