- Thread Starter
- #41
BTW, someone asked if it gets warm and I said no. I misspoke. Left it running for an hour or so and it was warm.
Yes. That gives you 30 wats and this thing only produces 2 watts or so.Is the designer here?
What size is the DC plug?
A 15Vdc 2A power supply is sufficient "headroom" for this amp?
I ran a ground wire from Audio Precision to the output RCA connectors. Actually had to do that for both channels. This was from the AP output.How didi you attached the ground? Curious to see.
??? I only got 1.1 watt. To get higher you would have to pump higher than 2 volts into it.Wait, did I misread at H2 gain it didn’t clip at 5W?
Single ended has clean output if designed properly like in this case.
Ah I think that’s reading from phone problem, I misread the 5Vrms to be 5W??? I only got 1.1 watt. To get higher you would have to pump higher than 2 volts into it.
Looks like it has 2x TPA6120A2Dumb question-what sort of output device (s) does this employ? Some sort of IC? Seems like a lot of power for a small HP amp.
Thanks.Looks like it has 2x TPA6120A2
https://www.ti.com/product/TPA6120A...hB6uPRUHGXmLjQyIM30aAmVvEALw_wcB&gclsrc=aw.ds
NO Child labor. I can sure.$120 for all this? Child labor must have taken place in making it.
Just ordered one. I think this should work great to remotely adjust the volume of my subs based on overall listening level. Hopefully I don't get ground loop issue.
Yes, will report back.Report back how it works with subwoofers. I get always customers asking for remote controlled volume devices and this one looks like a very well engineered and affordable solution.