Newbie question for measuring frequency response, I have a few basic questions. Not looking for an absolute perfect world answer but a general yes or no.
1) If I am testing a speaker which Amir tested, and I subtract my response curve in my room from his response curve, wouldn't that be a "room correction" that could be applied to obtain a frequency response curve, and applied to other speakers within reason? Or am I being too simplified and missing the boat entirely?
2) For comparing speakers, the room response is not all that important as the two speakers can be graphed and the difference is what I'm looking to compare?
3) Would it be correct to develop a DSP filter to correct the room response to match a known speaker to Amir's test results? Knowing that the region in the lower base may not be possible to fix due to the room.
4) I have REV installed, and a UMM-6 mic, done a few test runs. If I wanted to measure a speaker that only plays via Airplay2, I can't figure out how to get REV to output Airplay of course,.... so can I play a test tone and have REV record it with the timing stamp turned off? I need to read up on room corrections or his part 3 if that's out yet.
1) If I am testing a speaker which Amir tested, and I subtract my response curve in my room from his response curve, wouldn't that be a "room correction" that could be applied to obtain a frequency response curve, and applied to other speakers within reason? Or am I being too simplified and missing the boat entirely?
2) For comparing speakers, the room response is not all that important as the two speakers can be graphed and the difference is what I'm looking to compare?
3) Would it be correct to develop a DSP filter to correct the room response to match a known speaker to Amir's test results? Knowing that the region in the lower base may not be possible to fix due to the room.
4) I have REV installed, and a UMM-6 mic, done a few test runs. If I wanted to measure a speaker that only plays via Airplay2, I can't figure out how to get REV to output Airplay of course,.... so can I play a test tone and have REV record it with the timing stamp turned off? I need to read up on room corrections or his part 3 if that's out yet.